Beko Dw663 Dishwasher Water not heating up regardless on different cycles
I have changed the heating flow element & thermostat and it is not working. I have completed a hard reset as adviced by beko to switch off the main for two hours. Nothing has changed, I have read it could be the ntc and this may need changing, could this be the cause and if it is where is this located?
- Published in
Beko DW603 Dishwasher Not Heating The Water
Hi, the dishwasher above is not heating water. I’ve changed the heater element, control board and the thermal sensor. Still no change, any thoughts? Bob
- Published in
Bosch Dishwasher SMV40C30GB/48 The detergent tablet is not dissolving/not cleaning very well.
the detergent tablet is not dissolving. Making quite loud humming noise when running.
Its not spraying water very powerfully the spray arms are not turning (I’ve cleaned them out) but water is coming out, the water is hot essentially it seems to be steaming the dishes free rather than spraying them clean
Cleaned the filter, its draining fine
Checked drain sump no blockage
Does it sound like it needs a new circulation pump?
- Published in
Indesit Dishwasher DIF04B1UK error code lights 1 & 3
starts up stops before tablet comes out.
- Published in
Hotpoint Dishwasher FDEB10010P Flashing lights
When I start a cycle, the salt and rinse aid, and the on/off lights keep flashing, while the washing and end cycle lights both remain lit/on and the cycle never starts.
- Published in
Husqvarna Electrolux Dishwasher QB6120X 911926622/01 No heating
Hi, this machine complete washing cycles without any error… but with cold water. I have changed heating element and temperature sensor, but still only cold water washing. Do you have any similar experience? And do you have any recommendations?
- Published in
Indesit Dishwasher DIF04B1UK Continuous wash
Once we start program it just keeps washing. Have tried resetting by pressing the p button. It beeps there are no flashing lights
- Published in
Bosch Integra 800 Series Dishwasher SHX68M05UC/53 pump no longer turns
Looking to replace the pump in this dishwasher, but having trouble figuring out which is the right part. Thanks for your help!
Best,
Robin
- Published in
Hotpoint Dishwasher LFS114BUK.R LEDs 1 and 3 are flashing
Hi , My Ariston has an intermittant fault, but always the same error code.
LEDs 1& 3 flashing.
Can you help me ?
- Published in
Indesit Dishwasher DFP58T94AUK timer jumps forward after a few minutes
In all cycles with or without tablet detergent, dishwasher starts working and after a few minutes (19 for programme 1 with tablet, or 10 without tablet) time goes from 3:00 to 1:39 hours. it continues from there without changes. crockery in the end is hot, but soiled. all filters checked and clean, arms checked and are clean, salt and rinse aid filled. problem continues.
tried other programmes but the problems subsists.
any ideas what can be? have called a few engineers in the area but they didn’t had a clue.
many thanks
- Published in
