February 1, 2016 
What else could cause the heater not to work on as Beko DRCS 68W condenser tumble dryer? The heater block checks out ok, the stats are ok the front NTC stat seems to work with heat on it giving a reading, what else could the problem be?? I have got a new element to put in anyway but Im not sure this is the problem, what other things can I look for?? also the NTC sensor and it checks out ok, I,ve put a new one in anyway and the heater still wont come on!!!!! so now on this BEKO, its had condenser cleaned, lint filter checked, new heater block complete with thermostats incorporated, new front ntc sensor and still the heater wont come on!!!!!!! What else can cause thi heater NOT to work, Ive looked at every tutorial but cant seem to locate ANY other causes of heater problems other than element and/or stats!!!! Is there any internal heater trip or fuse any where in this machine??? Its a BEKO DRCS68W, I cant find any internal wiring diagram anywhere on the beko site or the search engines any where, Now getting to desperation stage for this machine!!! any additional help will result in a few beers!!!!!!
Joseph
Paul answers
BEKO DRCS68W tumble dryer Spare Parts
Hi Joseph
Double check the heating element, and also check again the front stat if the pcb is not getting the right reading it will not heat up. when you have checked that the wiring is good and ntc and heater then it might be a fault with the pcb
If you need any further assistance please feel free to contact me. all the best Paul.
Paul Charmbury
Appliances Engineer
