FORGOT YOUR DETAILS?

AAH, WAIT, I REMEMBER NOW!

Hotpoint tcl770P Tumble Dryer I think the heater is shot

by / Thursday, 22 March 2018 / Published in

Hi paul..Spoke with you earlier - just to recap I cannot get a ohm reading through the ntc sensor - buty could be down to difficulty with the meter connection,,many thanks for your helpbest Tom

tom mccarthy

Paul answers

I will try and help with this problem Hotpoint TLC770P Tumble Dryer

I have just done some research on your tumble dryer and it was a couple of different type of heaters fitted to this model of the machine. I have listed them both below for you, please make a note. There are two different types of wiring connections one has two connectors one with five wires one with two wires. The other has a 5 wire connector and two separate wires. I have also listed some videos below to assist you with your repair if you need any further assistance please feel free to contact me.

 

If you need any further assistance please feel free to contact me​. all the best Paul​.

photo  
Paul Charmbury
Appliances Engineer
youtube facebook google+ beer

List of spare parts for Hotpoint TCL770P Tumble Dryer

Our How-to-repair stores

Current page 1 Total pages 0

  • Tumble dryer Motor

    Category: Recycle Appliances

    £40.00

  • Ariston Creda Hotpoint Indesit Swan Tumble Dryer Tear Drop Bearing 18038

    Category: Recycle Appliances

    £9.90
24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP