Delonghi fan oven ESF461ST The element replacement
I will try and help with this problem with your Delonghi ESF461ST fan oven.
There are two ways that these elements can be held in place, the first is that there are two screws that hold the element at the top and usually one at the bottom, sometimes the manufacturer puts bolts through the top, this means that you need to remove the cooker from its housing on take off the backplate to gain access to the wiring and the nuts,
The pin that you mention on the mount has on some models being replaced by a screw, I have listed a couple of videos below to help you replace the element, they are all basically the same type of procedure, I have also included a video to show you how to test elements, and that is a genuine element Andre Pattern element available for this model of the cooker.
If you need any further assistance please feel free to contact me. all the best Paul.
 |
Paul Charmbury
Appliances Engineer     |
2 Responses to “Delonghi fan oven ESF461ST The element replacement”
Delonghicooker range.. Needs oven main element.. Disconnected from back.. Does the gas supply need to be turned off
To have any question answered you must use the contact us page