Electrolux EDH97941W Tumble dryer No light in panel

Hei!My dryer just stopped working. There is no light or sound from the dryer. There is power to the selector switch, but only 15 volt to door switch. Can you please help?Best regardsJohan

Johan Ospehaug

I will try and help with this problem Electrolux EDH97941W  Tumble dryer

Please note on this model there were 2 variations  

Please use your pnc number when ordering parts

As You will see in the wiring diagram below you should have to 220/240 volts coming from the mains suppressor which is next to the junction box going to the circuit board there is a plug that you will be able to disconnect and you will be able to put your voltage meter on this plug.  if you do have the correct voltage then I suspect you have a fault with the circuit board.

 you could try inspecting the circuit board and I have added a video below to assist you.  and I've also sent you a workshop manual to assist you. there is a full list of parts available at the bottom of the page

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page