Electrolux EOD43102K Fan oven takes too long to heat

I have replaced the oven thermostat and the fan element. The bottom element is working.When it is switched on, the neon stays lit for about 3 minutes then goes off. It comes on and off again at intervals but the oven takes about 3/4 hour to get to 150 degrees. What other parts can I change ? I am aware that it could be the selector switch but can't find out if there are any other safety devices/cut outs built in. If you can identify the part, could you tell me where to source it (preferably with a part number) please?

Brian Marshall

I will try and help with this problem Electrolux EOD43102K

Good afternoon Brian, there is a couple of things you need to check first is the fan going round at an adequate speed, if it is not blowing the air across the element then the thermostat may be cutting in and cutting out due to the temperature rising only at the back of the oven and this will give general false readings.
Secondly, you may have a problem with either a cutout safety thermostat or an intermittent fault with the selector switch, I will need the PCN number to really help with parts.

Electrolux EOD43102K Oven