FORGOT YOUR DETAILS?

lamona LAM3201 Not getting hot enough in the oven

by / Thursday, 17 December 2020 / Published in

I have an oven that is not getting to temperature it seems to be cooking everything on the top but not cooking correctly underneath it has a fan motor but I can't see an element and it doesn't seem to be getting hot enough

richard prior

Paul answers

I will try and help with this problem Lamona Lam3201 Oven 

 

as you will see in the exploded diagram below this cooker does not have a fan of an element it has a grill element and a base element the thermostat uses a combination of the two elements to heat the oven I suspect that the base element has gone faulty this is why your food is cooking on the top and not on the bottom. You will find a full list of parts for this cooker at the bottom of the page and I have also added a couple of useful videos to help you replace the part and also test the elements

 

For your future reference, I’ve included some Common faults with these Lamona Lam3201  Oven cookers to assist you in the future or anyone else reading this.

  • The oven will not turn on
    The first thing you need to check is that the oven timer is not on auto if it is turn it on to manual.
  • No Heat in Oven
    If the fan is running and the thermostat light comes on but you get no heat (or just the thermostat light on in non-fan ovens and cookers) then the probability is that the fan element or oven elements have failed.
  • Electricity trips (Rcd) when I turn the oven on or grill
    This is normally an element that has gone to earth, This is a well-known fault with electric ovens, the insulation breaks down in the elements and trips the RCD , best way is to stick a meter on each element and check that they have not got earth leaks on them. But this can also be a wiring fault.
  • The grill element doesn't work
    This would usually indicate that the grill element is faulty. Check these: Grill element, Oven changeover switch, Overheat thermostat, Main oven thermostat, if used to regulate the grill temperature.
  • The oven fan is not working or spinning correctly (slow) or is noisy
    The fan motor may need to be replaced see video on this also the cooling fan motor can cause same problems.
  • The oven overheats and burns everything
    Normally this is a simple thermostat failure which would manifest itself as this symptom.
  • The oven or cooker cuts out after it's been on for a while
    This is an overheating problem which can be caused by the fan motor or main oven thermostat or a faulty safety thermostat that will be causing the problem. It can also be caused by a failure of the cooling fan, where fitted, but usually these go noisy before failing, Safety thermostats are used to prevent the oven or cooker overheating and will shut the oven down.

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page

 

If you need any further assistance please feel free to contact me​. all the best Paul​.

photo  
Paul Charmbury
Appliances Engineer
youtube facebook google+ beer

Wiring diagram for lamona lam3201

Lamona lam3201 wiring diagram

Match your part for Lamona Lam3201 Oven and the use reference number in list below and click on the link to your part

Lamona Lam3201 Oven Spare parts list

Reference Part Number Description
412930089 CAVITY SIDE HINGE HOUSING
412930090 End Of Life CAVITY SIDE HINGE HOUSING
10 250440463 KNOB
1008 215440114 OVEN COOLING FAN MOUNTING SHEET
1027 215440258 BI METAL HIT PROTECTION SHEET
106 262900095 BOTTOM HEATING ELEM_(1100+1100)W_240V_UL
107 262900098 GRILL HEATING ELEMENT_(1100+1100)W_240V
108 215440109 HEATING ELEMENT HOLDER SHEET
11 215440110 BACK WALL
1127 258440102 BUILT-IN OVEN-SIGNAL LAMB HOLDER(SINGLE)
118 260405011 SERVICE CABLE GROUP
12 215440104 SIDE WALL
12 215440105 SIDE WALL
1334 250440414 CALL RIGHT COVER GLASS PLASTIC
1335 250440415 CALL LEFT COVER GLASS PLASTIC
1349 210410943 SCREW GROUP
140 173100022 KNOB PROTECTING SHEET CLIP WASHER
15 218440117 BOTTOM PLATE_60CM_BLACK
20 219441008 OVEN BODY
205 240440119 WIRE SHELF FOR TRAY
21 291400003 OVEN BODY SURROUNDED GLASS WOOL
22 291400010 GLASS WOOL REAR
23 215440224 SHEET
252 264440128 OVEN CIRCULATION BLOWER(100cm-RIGHT)
261 250440222 handle plastıc
263 263100035 EGO THERMOSTAT 551705303_280.MAIN OVEN
27 240440174 GRILL SHELF
28 219440101 BLACK ENAMELED ST TRAY(W_462xD_365xH_39)
29 255440101 MAIN OVEN _O_ SEAL
35 215440106 TOP WALL
368 218440105 SIDE PROFILE-LEFT-BLACK
369 218440103 SIDE PROFILE-RIGHT-BLACK
374 265900026 OVEN LAMB_25 W-230 V
375 265900025 DUY+CAM+AMPUL_25_W_BJB_CERAMIC
40 290440376 INNER FRONT GLASS_65LT
41 250440395 FRONT DOOR TOP DECOR
44 218440102 DOOR BOTTOM COVER SHEET
45 210441511 60_60 FRONT DOOR HINGE_SHORTER TYPE_
460 250920069 CABLE TIE-BIG_M TYPE_A20
47 215440356 HT-2 HANDLE HOWDEN ALU.EXT.ELOK417
475 265100044 SIGNAL LAMP
557 263410017 BODY BIMETAL THERMOSTAT ABNORMAL CONDITI
576 250440112 CONNECTING THE SWITCH PLASTIC
602 215440113 STEEL
618 210440103 AIR CONDITION SHEET
72 255440112 FRONT DOOR STOPER PLASTIC
883 250440103 DOOR GR SIDE HINGE PLASTIC HOUSING_RIGHT
883 250440102 DOOR GR SIDE HINGE PLASTIC HOUSING_LEFT
884 210441430 FRONT INNER DOOR INNER GLASS GROUP
887 250440108 OVEN HANDLING PLASTIC
888 250440109 FURNITURE MOUNTING PLASTIC
889 263410018 thermal cutout 70 degrees
9 218400222 DECORATIVE PANEL..
902 210440105 THERMOSTAT BULB CLIP
916 255440118 FRONT DOOR STOPER PLASTIC_BOTTOM_Ø8
93 263900019 COMMUTATOR
950 210441936 COOLING MOTOR PROPELLER

full list of spare parts for this model below 7756886301 LAM3201 LAMONA 60CM STATIC OVEN

Our How-to-repair stores

Current page 1 Total pages 0

3 Responses to “lamona LAM3201 Not getting hot enough in the oven”

  1. Rodney says : Reply

    I can’t find any screws to remove the Lamona 4603 main oven from built-in housing.

  2. William Hayes says : Reply

    Hi Can you please help me ? , I need a wiring diagram for the 5 position selector switch on my Lamona lam3201 , Please help William

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP