Whirlpool Washing Machine Zen Test & Diagnostic Mode
Repair Guide for Whirlpool Zen Washing Machine Test Mode & Service to Run Diagnostic Procedure
Entering test mode or service mode on your Whirlpool washing machine Zen FSCR 10431 or similar model is a great way to help diagnose faults.
During the test sequence, the machine simulates a wash cycle, verifying the functionality of key components. This includes the water valves, pressure switches that control filling, the heating system (sensor, element, and program board control), and the motor and pumps responsible for drum rotation and water drainage.
In this repair guide, we will walk you through the process of entering test mode, which can be difficult at times, and explain each of the six specific tests that it does.
So, please do not hesitate to watch the whole video to make sure you don't miss any steps along the way.
Additionally, you can visit our web store to buy genuine spare parts: https://shop.how-to-repair.com/collections/washing-machine-parts
Safety First!
- Diagnose test mode should always be run with the drum empty and no clothing in the drum.
- If you have to do any work on the machine, make sure you unplug the appliance from the electricity supply.
- Organize screws and parts meticulously to avoid confusion if you have to do any work on the machine.
Let's Begin!
In this Whirlpool Zen washing machine test mode guide, you will learn:
- How to identify compatible Whirlpool washing machine Zen models.
- A step-by-step guide to entering test mode with C0 codes.
- What happens during the test cycle, how the drum rotates clockwise and anti-clockwise rotation, and what are the test mode codes.
Whirlpool Zen 10 KG Washing Machine Test Mode Activation
First things first, if you have an FSCR 10431 Whirlpool Zen washing machine or similar model (listed at the bottom of the page), it is worth watching our video since we explained more detail and gave more tips.
This test is basically a one-stop test sequence, which means once you enter factory mode or service mode and start the program, it goes all the way through the test procedure.
Please follow the steps below to learn how to put a Whirlpool washer in diagnostic mode:
- First, make sure the drum is completely empty with no clothing in it.
- Then, please shut the door.
- You will need to press the on-off button, and this will illuminate the display.
- Then you need to work with button 1 and button 4. You need to press these buttons together, and then, while holding button 1 down, you need to continue pressing three more times on button 4 to enter the test mode procedure.
- Then it will enter the service mode.
- You will also be able to turn the dial between factory mode and service mode. Factory mode records the actual error that occurs during the cycle, and service mode will show you the last recorded errors that were on the system.
Whirlpool Washing Machine Zen Test M0de Codes
C00: This test checks the main program function and door lock, then searches for related error codes (F02, F05, F07, F08, F13, F20, F21, F24, F26, F27, F29, F36, and F60).
C01: This test checks the motor's rotation (clockwise and anticlockwise), water valves, and pressure switch system. It then searches for related error codes (F01, F36, F06, F07, and F10).
C02: This test checks the heating system's function. It activates the heating element for approximately 10 seconds and shows the temperature reading from the NTC sensor. It then searches for related error codes (F06, F07, and F27).
C03: This test checks the recirculation water pump, then switches to the main pump that empties the water. It then searches for related error codes (F0 3, F06, F07, F15, F26, and F27).
C04: This is a long test that checks the drum for imbalance, displaying the detected imbalance on the display in kilograms and grams. It then tests the motor function up to the maximum RPM the machine was designed for. It then searches for related error codes (F06, F07, F28, and F34).
C05: This test simply shuts down the power supply to the motor, allowing it to brake to a stop. Once the drum has stopped, it allows the door to open and turns off all power to the CPU. It then searches for related error codes (F13 and F29 FdL).
List of Models to Enter Test Mode on Whirlpool Washing Machines
This Whirlpool Zen washing machine service test is suitable for models like these:
- FSCR 10431
- FSCR 12430
- FSCR 12442
- FSCR10432
- FSCR10432 S
- FSCR12430
- FSCR70411
- FSCR80416
- FSCR80421
- And some Bauknecht models WA Prime 1054, WA Prime 1054 Z
Related Whirlpool Zen Washing Machine Video: https://youtu.be/SMBp8ULDrbw?si=qR6MHG4yWPpYCWl9