LG F1247TD washing machine Drum wont turn
I have replaced the haul sensor on my washing machine after watching one of the videos, but the motor will still not turn. the drum is very stiff and when the machine fills with water it tries to turn but stops, after having a conversation with you on the phone, I have had great trouble removing the element but after finding out that there was an additional nut holding the earth wire on the element. I eventually managed to get it out and lo and behold found this sock wrapped around it
Caroline O'Casey
I will try and help with this problem with your LG F1247TD washing machine
Most of the time with Lg washing machine direct drive systems when they do not turn it is normally a fault with the motor or the haul sensor but you normally get a rocking action on the motor, but in your case, the drum has seized and stopped the machine from turning. I have put some videos below to help you clear of any blockages in the drum and the sump hose if you ever need us again I have listed parts for this washing machine below and a couple of useful videos on this model of machine.
Here is a video on haul sensor replacement done by a company in the USA the haul sensor is called a Rotor Position Sensor Switch in the USA
Thanks Paul. I am going to recommend your YouTube channel on my veterans groups. Hope that helps? ☺
I am not the most patient person I know. Work in progress…
I had to use the claw on the claw hammer to prise the element out in the end ( I was careful). It is working completely now.