Siemens dishwasher SE64E330GB/32 fill Problem
Hi there, fantastic website! I'm having trouble with my Seimens dishwasher. Model SE64E330GB/32. I went to turn the machine on, led's weren't lighting up on the control panel. Removed casings, power was going to control module. Opened module and found a burned looking track on the board, so I replaced it. Machine was then turning on again. Ran the machine and it kept filling and draining. Found some water in the sump so removed cleaned and dried it iut. Ran the machine again and checked for leaks, and found none. The diagnosis is exactly like your flow meter video. So I ordered one in my local parts shop. Replaced the flow meter, checked for leaks ect, fault remains. What would be next diagnostic check? Could my pump be gone? Maybe this cooked the control module ect? If you could shine any light on the situation that would be great. If not ill right an engineer ; ) Kind regards
Gary Egan
Hi Gary Egan
hi from what you are saying i still feel it might be the flow valve! did you fit it the right way round as the is normally an arrow on them showing water direction
-
How to replace Dishwasher pump Bosch, Siemens etc
-
Dishwasher constantly draining Balay, Constructa, Kuppersbusch, Neff, Siemens, Tecnik.
-
Bosch dishwasher keeps emptying and filling, how to diagnose the fault and replace parts
-
Dishwasher not filling with water or washing correctly. How service the appliance.
-
Bosch, Neff or Siemens Dishwasher not emptying fault E25 Error Code