Siemens Sn46m281sk/19 dishwasher Won’t pump. E25
Have an old (2009) siemens. Ive got e25 on display. Checked and clean the filter and the impeller is free. Pump is working proporly when its outside of the mashine, even with resistant.( Altso tried with a new pump)The tubing from the pump is clean. But ist stops when the water is coming to the side-water-thing on the side of the mashine. The water goes free around an bend inside of it, and some water goes up a tiny slot. When its on top it stop pumping and its an error. Why? I dont think its any electronics up there in the center. Ist a little clothy there, but water comes throu when i rinse water throug manually. No lekaking. What can i doo? Greetings from norway
Kai Roger Kasin
I will try and help with this problem with your Siemens Sn46m281sk/19 dishwasher
There are a couple of things that you need to check - firstly you need to make sure that the fill chamber on the left is completely clear of any sludge or blockages, then you need to check the waste-pipe going from this area to your drainage system is completely clear and if you have it connected to a sink unit then make sure there are no blockages in this.