zanussi heating element How to test tumble dryer heating element
Hi PaulShould I get continuity on both heating elements? I am only getting on one. How do I test the ntc sensor ?
David
Good morning David I will try and help with this problem...
Here is a typical tumble dryer heating element.
The heating element consists of a high heat setting and a low heat setting, there are actually 2 elements in most tumble dryer heating element units. Both elements together consist of the high setting and only one of the elements are used on the low setting, both elements use the same neutral.
This consists of 2 live wires and 1 neutral. using your multimeter you need to connect to the neutral and then one Live and you should have continuity, then on the other side you stay connected to the neutral and connect to the other live and you should have continuity.
list of spare parts for this model
https://svcs.ebay.com/services/search/FindingService/v1?OPERATION-NAME=findItemsAdvanced&SERVICE-VERSION=1.0.0&SECURITY-APPNAME=Ferdinan-h2rliste-PRD-95d705b3d-1d9306c9&RESPONSE-DATA-FORMAT=JSON&GLOBAL-ID=EBAY-GB&affiliate.trackingId=5338688226&affiliate.networkId=9&REST-PAYLOAD=true&paginationInput.pageNumber=1&paginationInput.entriesPerPage=12&keywords=zanussi++heating+element++How+to+test+tumble+dryer+heating+element&descriptionSearch=false