Hoover Candy Washing machine error fault codes and self test mode
This video will show you the full error codes on faults with your Hoover One Touch washing machine candy Grand O'Vita washing machine also I've included the diagnostic test mode instructions.
E:00 Defective "Cuore" Power Card – Not Programmed "Cuore" Power Card.
E:01 Door Safety Lock Device/Drum's Braking device defective and/or Wiring.
E:02 The Water Fill Phase was not completed within the designed limit time. Defective Solenoid
Valve, Pressostat, Water Fill Hose, Low Water Pressure in the network and/or Wiring.
E:03 The Water Drain Phase was not completed within the designed limit time. Clogged Filter, Drain
Pump, Drain Hose, Wall Discharge and/or Wiring.
E:04 Several (3) interventions by the Anti-flood Safety Contact of Pressostat. Solenoid Valve blocked
opened, defective Pressostat and/or Wiring.
E:05 NTC Temperature Reading Probe opened or shorted and/or Wiring.
E:06 Eeprom – Defective "Cuore" Power Card and/or Wiring.
E:07 Defective Door Safety Lock Device (blocked closed) and/or Wiring.
E:08 Defective Tachometric Dynamo (opened or shorted) and/or Wiring.
Ohmic value of Tachometric coil for the Motor by Ceset: 42 Ohm
Ohmic value of Tachometric coil for the Motor by Selni: 90 Ohm
Ohmic value of Tachometric coil for the Motor by Sole: 184 Ohm
E:09 Defective "Cuore" Power Card (damaged Motor's TRIAC) and/or Wiring.
E:11 Open Circuit on Drying Heater and/or NTC Probe for Drying and/or Electronic Module for Drying and/or Wiring.
E:12 Missing Air Heating during Drying: defective NTC Probe and/or defective Drying Heating Element and/or Wiring.
E:13 No dialogue between "Cuore" Power Card and Display board and/or Wiring.
E:14 Missing Water Heating: defective NTC Probe and/or defective Water Heating Element and/or Wiring.
E:15 Defective "Cuore" Power Card – Not Programmed "Cuore" Power Card.
E:16 Water Heating Element is short circuited or defective electrical insulation.
E:17 Wrong signal from Tachometric Dynamo.
E:18 Defective "Cuore" Power Card and/or Wiring – Wrong Network Frequency.
E:19 Missing communication with the NFC device: defective "Cuore" Power Card or Smartphone.
E:20 Difficult reading of water level: defective APS Pressostat generates a wrong frequency value.
E:21 Missing reading of water level: Wiring or APS Pressostat or Cuore" Power Card are defective.
E:22 Troubles with water heating: Wiring or Water Heater or “Cuore" Power Card are defective.
-
Hoover Candy Washing machine error fault codes and self test mode
-
Hoover Vision Hd & Candy Washing Machine E08 Error Fault Code Replace Carbon Brushes
-
Candy Washing Machine CDB126-80 Door release mechanism
-
How to replace washing machine motor on Hoover, Candy, Iberna, Teka, Otsein & Zerowatt.
-
How to replace a washing machine door seal or gasket on Hoover, Candy, Iberna, Teka, Otsein & Zerowatt.
-
How to replace washing machine bearings on Candy, Hoover, Otsein, Zerowatt Etc.
I have a hoover washing machine model: doc 410c3/1-80 type: fcm9.
I have an error code E08.
Having watched your video it looks like I need to call in a professional to carry out the testing and repair. Is this the case or can you help and explain what I need to do.
You have helped me before to replace a capacitor in my candy tumble dryer, so if you can help me with this I think I might owe you a beer or 2.