How to Replace a Hotpoint Washing Machine Drum Paddles or lifters.
This video will show you how to replace a washing machine Drum Paddle or lifters on various models of Hotpoint washing machines.
To order your washing machine Drum Paddle or lifters you will need your full model number. (This is normally around the washing machine door frame on a sticker)
Question from customers: Why Hotpoint Washing Machine Drum Paddles Break. This video will show you how to replace a washing machine Drum Paddle or lifters on various models of Hotpoint washing machines.
There are 3 simple reasons why drum paddle or lifters break these are:
1 customers put things into the Hotpoint washing machine that they shouldn’t
2 Plastic degrades over time and they cannot take the stress of the loads.
3 After the customer has replaced the part and were not fitted correctly and have come loose and broke.
Lots of people wash all manners of things in a washing machine (trainers Etc) that they shouldn't.
One of the most common drum paddles that breaks, are the ones fitted to Hotpoint washing machines. This type is most notably the drum paddle most commonly fitted incorrectly by owners and, if they are not fitted correctly, they will break or shear off again meaning that you will have to buy more. That’s not a huge issue as these drum paddles are not hugely expensive but this video will help you get it right.
The trick with Hotpoint washing machine drum paddles is the locking tab.
There is a small tab that has to be lifted back up, pushed down to remove the paddle, you will need to fashion a tool that will perform the same task. If you don’t get the tab back up properly and, we mean properly, the paddle will come loose and break again.
-
Error fault codes for Ariston, Hotpoint Indesit, Scholtes washing machines
-
Flashing Lights & Error/Fault code
-
Washer dryer not heating up on Ariston, Creda, Hotpoint, Indesit, New world and Scholtes washing machines
-
How to replace a washing machine door seal on Hotpoint, Indesit, Ariston & Scholtes
-
How to replace your washing machine motor on Hotpoint, Creda, Etc early models only
-
How to replace washing machine carbon brushes on Hotpoint, Creda, Etc
-
How to change washing machine water valve for Hotpoint, Indesit, Proline, LG, Whirlpool, Zanussi
-
How to test a washing machine motor
-
How to replace washing machine motor carbon brushes C.E.SET Motors
-
How to Fit & Replace Washing Machine Drum Support or Spider
-
How to Change & Diagnose a fault on a pump in a washing machine
-
How to change bearings on a washing machine 1 of 4
-
How to change bearings on a washing machine 2 of 4
-
How to change bearings on a washing machine 3 of 4 this includes how to fit the shaft or spider.
-
How to change bearings on a washing machine 4 of 4. The reassembly of the machine.
I have a hotpoint using the paddles with the three markings on one end. I cant find the correct position the metal tab needs to be in. I have tried several times from 90° to 10° angles but the inner paddle seems to cut away in the middle and come loose making the paddle unusable. Can you please help with the exact tab positioning?
we would need model of the hotpoint first
Is there a video on how to fit drum paddle in hotpoint Aqualtis
On line you only show how to fit the easy one that releases with a tab
when you have a question please use our contact us page for 24 hour response https://how-to-repair.com/help/contact-us/
Appliances Engineer
I have an Hotpoint Aqualtis model number AQ114D69DE Washing Machine. I need to replace one of the paddles, they are like a “S” shaped paddle with holes along the top and one hole on the end. I have a good one to fit, but I cannot work out how to get the old one out. There is about 1mm play / movement backward and forward. I have tried with a probe in each hole to feel for a barb, to depress so it will come out with no success, if anyone can help I will be so thankful. Many thanks Paul.
I am having the same problem as Paul above trying to remove one the ‘s’ shaped paddles from a Hotpoint AQ113DA 0697E, i cant seem to locate a catch or tab anywhere in any of the holes to allow it to slide out and be removed. Does anyone have any ideas?
This is the paddle:
https://www.4hotpoint.co.uk/washing-machine/aq113d-697s-uk-f076680/removable-washing-paddle-high-end/product.pl?pid=3263116&path=52516&model_ref=3589508
Thanks
Jason