If you have an error code coming up on your 6th sense Whirlpool, Bauknecht or Laden Tumble Dryer there is a fault with the appliance, you will need to find out what the problem is. In this tutorial i will show you how to test the motor and show you how a quick way to see if

If your tumble dryer is not heating and laundry comes out cold and wet you generally need to call an engineer, but there are a few things you can check. There is a good chance that it is a fault with the heater system. When your tumble dryer is not heating it is either a

 If your whirlpool tumble dryer has stopped working and you have an error code which is usually due to some type of fault then this short video will show you how to clear the fault it can also be used on these makes Bauknecht, Laden & Maytag on some models. You need to use the

 Error code family E5? is 5 flashing green lights followed by a number of red flashing lights?These error codes are for ENVo6 Cuirct boards on these tumble dryer Electrolux, AEG, Arthur Martin, Elektro Helios, Eureka, Faure, Frigidaire, Gibson Appliance, Husqvarna, Kelvinator, Marijnen, Parkinson Cowan, Progress, Simpson, Tornado, Tricity Bendix, Volta, Westinghouse, Zanker, Zanussi & Zoppas.  

       If your Condenser Tumble Dryer keeps showing the empty light and the tumble dryer will not start then this video will teach you how to replace the pump unit.This video will show you how to replace a Condenser Tumble Dryer pump and float switch system when the water light stays on.How to fix &