October 31, 2025 
In this guide, we’re focusing on the Beko WMC1282W washing machine. I’ll walk you through how to enter the machine’s diagnostic test mode and what all the error codes mean. This is the essential first step for correctly identifying any faults before you start a repair. The specific machine featured in our video had an […]
March 30, 2015
Important notice on Beko WM5100S WM5100WBefore entering test mode please be aware that you are not meant to leave the washing machine Unattended. There is a chance the machine can overfill when testing the water valves or the Machine could overheat when testing the heater. Also when entering the test mode make sure the
January 13, 2015
If you find that you have to replace the belt, motor or bearings on your 6th sense tumble dryer made by Whirlpool, Bauknecht, Laden, Maytag, this video will show the basic techniques for doing this.
December 13, 2014
This video will show you the basics of tumble dryer heater elements The heaters on tumble dryers differ from make to make and even model to model. They can be located in the front of the drum or at the rear of the cabinet, but they are all controlled by thermostats or thermistors that switch
December 13, 2014
To order your Washing machine NTC Sensors and Elements you will need your full model number. (This is normally around the washing machine door frame on a sticker) The temperature is controlled by the PCB by means of a NTC temperature sensor incorporated in the heating element when you test it the Resistance drops as the
