Fix Beko Washing Machine Ticking Noise & PCB Fault! DIY Repair Guide 🔄 Click here for carbon brushes Click here for PCBs Comprehensive Guide to Diagnosing and Repairing a Beko Washing Machine with Motor Ticking Noise and Circuit Board ShortIn the video below, discover how to repair a ticking noise problem with your washing machine.

This video will show you how to remove mold grime and bad smells from washing machines.  This video will prolong the life of your washing machine and save you money.Removing mold and grime from a washing machine has never been so easy this video will show you the full process of sanitizing your washing machine

E08 or Error 8 is a common error code on most Hoover Candy washing machines this usually indicates a problem with the motor, and the most common reason will be that the carbon brushes have worn down and not completing a circuit through the motor, replacement is easy and should be carried out with the

One of the most common problems to occur with a washing machine is for the door seal to get torn or damaged. This can normally be detected by the washing machine leaking.  In this tutorial we will explain how to remove the old door seal and fit a new one. If you’ve never replaced a

When your washing machine will not start you may have a fault the dE error code indicates that the washer door was unable to lock. This can normally be resolved by performing a simple reset on the washing machine or you may have a fault with the pin system or hinge but normally this will be

If your washing machine starts and then stops or turns off and all the lights go out or the digital display goes blank there is a good chance you may have a fault with the circuit board. You may have a bad connection, a dry joint on one of the components, or you may have a

Electrolitic capacitor

  We have made 3 videos on clearing blockages in washing machines, this one will show you how to clear the sump hose and filter, the other videos below will show you how to clear a pump and also how to remove foreign objects from within the drum.

  If you have a washing machine pump filter is jammed or stuck and you can’t open it do not force it. This video will show you how to gain access to the pump and remove any debris That may be blocking it. I have been using these Bore-scopes to find foreign objects in washing machines for