FORGOT YOUR DETAILS?

   If you find that you have to replace the belt, motor or bearings on your 6th sense tumble dryer made by Whirlpool, Bauknecht, Laden, Maytag, this video will show the basic techniques for doing this.

 If you have an error code coming up on your 6th sense Whirlpool, Bauknecht or Laden Tumble Dryer there is a fault with the appliance, you will need to find out what the problem is. In this tutorial i will show you how to test the motor and show you how a quick way to see if

 If your whirlpool tumble dryer has stopped working and you have an error code which is usually due to some type of fault then this short video will show you how to clear the fault it can also be used on these makes Bauknecht, Laden & Maytag on some models. You need to use the

 The temperature is controlled by the PCB by means of a NTC temperature sensor, when you test it the Resistance drops as the temperature rises.

These error codes are for ENVo6 Cuirct boards tumble dryer Electrolux, AEG, Arthur Martin, Elektro Helios, Eureka, Faure, Frigidaire, Gibson Appliance, Husqvarna, Kelvinator, Marijnen, Parkinson Cowan, Progress, Simpson, Tornado, Tricity Bendix, Volta, Westinghouse, Zanker, Zanussi, Zoppas,If these fault codes apply to your Tumble dryer it should have a fascia panel on it like one of

If your tumble dryer is not turning it is usually one of these three faults.This video will help you with all these makes of Tumble dryer Ariston, Electrolux, Ignis, Indesit, Neutral, Tricity Bendix, Whirlpool and White Knight that are struggling to turn? It’s likely to be a problem with the capictor or belt.the belt may

       If your tumble dryer is not turning or you can only hear a low humming noise with no drum action then it is probably your capacitor or motor. This video will show you a step by step procedure on how to diagnose the fault and how to replace a motor capacitor.  How to replace a

Your tumble dryer is not heating? Could Be One Of The Following: If you have a Tumble Dryer that is not heating up but the drum is turning ok, then the chances are the thermal overload cut-out has tripped or the heater might have blown. Some older dryers have a red reset button on the

This video will show you how to replace the bearings and drum spindle in a tumble dryer. it can also be used on all these models: Ariston, Asko, Aspes, Bluesky, Bomann, Brandt, Brother, Clatronic, Creda,Crusader, Edesa, Electra, Eurotech, Export, Exquisit, Friac, General electric, Hotpoint, Indesit, Jackson, Proline, Upo and white Westinghouse.We will show how to

TOP