Baumatic Tumble Dryer BTD1 The spider bracket and bearing housing has come adrift of the Drum
Do you have a Baumatic BTD1 Drum in stock part No:421309205531. If no can you source one for me/
Keith
- Published in
Howden Tumble Dryer HJA 8620 Broken drum spider assemble
The drum spider assemble has snapped at one of the three fixing points. Do you stock spares for this.
- Published in
White Knight Vented Tumble Dryer C44AW Won’t always change direction
Hi, recently bought a new capacitor from you, but machine still won’t change direction at times, just hear buzzing. Only way to restart is to unplug from mains & then it’s ok. Any ideas please? Thanks
- Published in
White Knight Tumble Dryer Eco86a Drum not rotating
Once program is selected and machine started there is just a humming noise.
I think it’s the starter capacitor as it functions when assisted by hand in both directions. I am told its an 8 microfarad capacitor.
Can you supply this part and tell me the price please. Much appreciated
- Published in
white knight Tumble Dryer cl412frv heat selection switch
I would like to know how to test the heat selection switch to see if it is working correctly on high and low setting
- Published in
White knight Tumble Dryer 44AW Element blown
Hi there, I’m ready to chance element with the help of your videos. Unfortunately I cannot get the original 2450w element, would a 2500w be safe? Thank you.
- Published in
Beko Condenser Tumble Dryer DSX83410W Program not starting
Hello.
My tumble dryer powers up and allows me to select a program, but the program doesn’t start. This was initially intermittent – but now wont go on at all. I’ve entered test mode and noticed that the fan doesn’t go on during “fn:on”, the drum does not spin during “dr:rr”. I get as far through the test as “Sc:Er” and then can’t get progress further.
Any advice to diagnose what’s going on would be much appreciated
Thanks!
- Published in
Candy Condenser Tumble Dryer CSC9LF-80 NOT DRYING CLOTHES
- Published in
Hoover Condenser Tumble Dryer dxc9tceb-80 E21 –
Hi, pump runs when 230v placed across the terminals, float level switch opens/closes, continuity of cabling from pump and switch to PCB connecter confirmed OK
I suspect main board but cant remove knob to examine board, thoughts?
Chris
- Published in
Hoover Vented Tumble Dryer Vision HD Vhv381-80 beeps and and stops after a few seconds
After watching your great videos. I have replaced all thermostat and the heater element but still stops after a few seconds with the lights flashing. a couple of times the heater did start but the stopped and beeped again. I think the only thing it could be is the PCB board part number 40005134. Would i be able to buy one or send it of to you for repair.
Thank you.
- Published in