Siemens WT46E380GB IQ300 Condenser Tumble Dryer Won’t Turn On

I believe my Siemens WT46E380GB IQ300 Condenser Tumble Dryer has a fault with the printed circuit board. The door switch clicks but doesn’t seem to have power to it. Can I have details of the company you use to test and repair it. Do you sell spares yourselves Thanks.

Desmond Dunne

I will try and help with this problem about Siemens WT46E380GB IQ300 Condenser Tumble Dryer

Good morning Desmond. It's hard for me to pinpoint the exact issue without having the machine here. I can't use my multimeter to check the terminals for readings. However, if you hear the door lock clicking, it usually means it's working when you press start. But the door lock could be faulty, or a wire connected to it might have a bad connection. Sometimes, the printed circuit board might be the problem.

To figure this out, you'll need to test each wire going to the door lock from the printed circuit board. Check for continuity in case there's any metal fatigue or breaks in the wire, though this is quite rare. If all wires are fine, then it's likely either a faulty door lock or printed circuit board.

Another possible issue is if the pin system connecting to the door lock has shifted or broken, preventing it from latching onto the door and starting the machine. Make sure to check this as well.

I've included some diagrams to help you locate all components in your machine. We have some second-hand parts available, but unfortunately not a printed circuit board at the moment.

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page