F06 or F17 Error Code – Hotpoint Indesit Washing Machine Recall – Fire Risk Contact
This video will show you how to fix F06 and F17 error codes on Hotpoint and Indesit washing machines.
If you need to check if your Hotpoint or Indesit washing machine has been Recalled here is the link: https://washingmachinerecall.whirlpool.co.uk
A lot of Hotpoint Indesit some Creda and Ariston washing machines were recalled due to faults with the door interlocks and the wiring harness that goes to the printed circuit board, Although these were a fire risk a lot of these machines are repairable with the new modified door lock It is highly recommended that the manufacturer Or a qualified engineer does the work as they are all covered under the guarantee scheme. this video will show you how to replace a door lock but if there is any sign of burning on the electrical plug Then it should be always replaced by the manufacturer
Use your full model number to find the right door lock for your washing machine
Hotpoint Indesit model numbers look like this
-
Washing machine not heating Hotpoint, Indesit, Ariston and Whirpool made machines
-
Replacing a drum on a washing machine: Hotpoint Indesit Ariston Whirlpool
-
How to change washing machine water valve for Hotpoint, Indesit, Proline, LG, Whirlpool, Zanussi
-
How to Replace Whirlpool washing Machine Door Seal
-
Error fault codes for Ariston, Hotpoint Indesit, Scholtes washing machines
Hi F06 flashing changed inner door lock machine works for a week then F06 flashing again help
F06 flashing got inner door lock changed worked for a week then F06 flashing again help
Hello I have a hotpoint and has fault code
F06 means door lock
I have fitted new door lock but the fault is coming back I have checked the doer handle and that’s is ok .it runs and drain for a long time then goes to fault code f06
Washing machine WMFUG842 PCB blew damaging Q32 and R206 any ideas? I am a technician no Schematic
Looked at videos of error 602 hotpoint washing machine gave answer to remove plinth push up bar @ OPEN machine but have no bar to release door
Hi. I have no emergency pull chord and the machine is locked hotpoint NSWR 965C GK UK N washing machine. What should I do?
Thanks