I have a beko OTF12300X oven which I have inherited from my mother in law and the oven suddenly stopped working the first time I tried to use it. There is no power at all, I’ve checked the fuse and this seems ok, its not been hard wired to the electric but runs from a plug in the socket

I have a beko OIM25503X single oven which I have had for 8 years and the oven suddenly stopped working,everytime i turn it on it keeps tripping the electrics but the grill is working fine

Hi Paul! My Beko OIF22301XR Built-In Electric Single Oven is not heating, when I first turned on the cooker it tripped out a few times. Now the cooker the cooker does not seem to work.Can you help?

Hi Paul, My Beko OIM22500XP Electric Single Oven is not heating, when I turn it on the electrics to the flat cut out. Now the cooker turns on and the display lights come on but the cooker does not seem to work and start heating up. Can you help?

Hi I have built in beko oven and gas hob, the hob is fine but the electric fan oven is barely getting warm and I don’t think the fan is turning but the light is on in the oven , I think the fan has broken down but not sure if the element needs replacing also. Is this a difficult job to replace parts being a built in cooker, thanks for your time

My Cooker cuts out and shuts down after a short time. it starts and turns on as normal but after about 20 mins it just shuts itself off.The display lights stay on but flashes continuously

hi the oven grill works and so does the top oven but the main oven is only getting slightly warm the fan is turning very slow

and the light inside of the oven does not come on I’ve replaced element still the same, could you tell me what else it could be, please

Would you stock function selector control for my built in oven

hi paul i had a power failure while i was using the oven. when i turned power back on the lights on the front are still flashing, how do i reset the oven. i’ve tried following the advice in the manual but i just can’t seem to get the oven to work. I have tried switching the power off on the wall then switch back on then re-setting the time with the up/down buttons, this only cured the problem for a short time, and now its not working again. Thanks Paul