BEKO ODF21300B power failure now oven wont work

hi paul i had a power failure while i was using the oven. when i turned power back on the lights on the front are still flashing, how do i reset the oven. i’ve tried following the advice in the manual but i just can’t seem to get the oven to work. I have tried switching the power off on the wall then switch back on then re-setting the time with the up/down buttons, this only cured the problem for a short time, and now its not working again. Thanks Paul

Dean

I will try and help with this problem with your Beko Double Oven ODF21300B

I suspect you have a faulty timer ~ to allow you to use the oven switch off the power, leave it off for ten minutes, switch it back on but do not adjust the clock. This should allow you to use it in manual mode whilst you get another timer

A clock that’s not displaying could also be caused by a faulty terminal block. If the terminal block is causing the fault you will need to check at the back of the back of the cooker where there may be a number of circuits connected by links from the main power connection – check for loose or charred connections.

Check the links and diagrams below to further assist you

For your future reference, I’ve included some Common faults with these Beko Double Oven ODF21300B cookers to assist you in the future or anyone else reading this.

• The oven will not turn on
  The first thing you need to check is that the oven timer is not on auto if it is, turn it on to manual.
• No Heat in Oven
  If the fan is running and the thermostat light comes on but you get no heat (or just the thermostat light on in non-fan ovens and cookers) then the probability is that the fan element or oven elements have failed.
• Electricity trips (Rcd) when I turn the oven on or grill
  This is normally an element that has gone to earth, This is a well-known fault with electric ovens, the insulation breaks down in the elements and trips the RCD , best way is to stick a meter on each element and check that they have not got earth leaks on them. But this can also be a wiring fault.
• The grill element doesn't work
  This would usually indicate that the grill element is faulty. Check these: Grill element, Oven changeover switch, Overheat thermostat, Main oven thermostat, if used to regulate the grill temperature.
• The oven fan is not working or spinning correctly (slow) or is noisy
  The fan motor may need to be replaced see video on this also the cooling fan motor can cause same problems.
• The oven overheats and burns everything
  Normally this is a simple thermostat failure which would manifest itself as this symptom.
• The oven or cooker cuts out after it's been on for a while
  This is an overheating problem which can be caused by the fan motor or main oven thermostat or a faulty safety thermostat that will be causing the problem. It can also be caused by a failure of the cooling fan, where fitted, but usually these go noisy before failing, Safety thermostats are used to prevent the oven or cooker overheating and will shut the oven down.

Beko Double Oven ODF21300B circuit diagram Beko Double Oven ODF21300B Parts View Beko Double Oven ODF21300B top oven parts view

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page

Beko Double Oven ODF21300B Spare Parts