Hi paul my oven tripped the electrical board, now sno heating what could the fault be

my oven tripped the electrical board, now stopped heating and I think the fan oven element has blown could you give me some help on what part I need and how to change it

over the weekend my oven went by bang and tripped the electrical board it is now stopped heating and I suspect the fan oven element has blown could you give me some help on what part I need and how to change it

Hi
My Neff single oven (B1451) does not heat up on fan setting but does on the top/bottom heat setting. Does the fan setting use a different heating element to the top/bottom setting? I’m guessing both settings use the same heating elements and the fan setting simply turns on the fan. If I’m right, this presumably means that the fan setting is turning on the fan but not the heating elements. So does this mean the problem is in the main switch unit? Any help on this would be much appreciated.

I have been trying to get a heating element for the bottom oven. However your site does not recognise the numbers I have put in ! I need the correct part

Hello, I hope someone can help me!I am trying to fit a new element to a delonghi fan oven model ESF461 ST.The element is held in place by one screw on the left and 2 pins in the plate so I can’t see a way it can be removed from the front so I think this has to be done from the back.I have removed the door, the back plate and unscrewed the oven unit. I have managed to pull it out about a foot but it won’t come out any further.Could anyone offer any advice? What could be preventing it coming out?Also, assuming I get it out, I’m a bit confused by the whole self-tapping screw business for fitting the element. I’ve not used these before… Shall I see what comes out and get some new screws the same size?Thanks in advance. Please keep answers simple!Caz

Hi The heating element on my daughter’s oven has packed up. I have a little experience in replacing a duff element, as I did so on my own Belling oven, but that was situated at the back of the oven.
As I don’t have any other experience; is the element in the above model of oven at the back, or is it siuated elsewhere? I hope you can guide me, many thanks. 33700301 Best wishes Ian

Fat is spattered all over the cooker at every use, is the fan at fault?

I need to replace broken control panel fascia.

Hi, my oven is no longer heating up.
Followed you instruction video & removed the element.
Tested for continuity but nothing so looks like I need a replacement element from you.
Reason for me contacting you is that I can see 2 replacement elements for. Y model, so need you to let me know which one I need.
1st element: H2RCSP00001, priced at £17.90p &
2nd element: H2RCSP 02800012 priced at £31.49p.

Also how long does delivery take for a UK address?

Thank you – Ian