Hi Austini would check the brushes and make sure all pipes are clear. I have also included some useful links here To try and help with this problem on your Beko washing machine, I have put together a full list of videos below on your washing machine. There are many common questions that people ask about

  Hi Trevorbefore we look at the pcb i suggest you check the door lock see video below

  Hi Tracy GreyYou need this drum paddle lifter for your Hoover Optima 7kg mod.OPH716DF-80 i have not done the video on this one yet but its on my list you need to press the release catchI hope this answers all your questions. I have put a video below to help you with your drum lifter but they are not

        Hi Michelle   First things first you need to check the brushes on the motor its the most common fault if you have a welling motor then these are what you need if different come back to me with the motor type , I have included the video below for you to replace

    Hi Iqba  there is no filter on this model i think you need to take the pump and sump hose of to unblock i hope this help i’ve included video below to help you 

    Hi Stacey  I would check the pump first as you may have a blockage then check the waste pipe and sump hose.see videos below for help 

    Hi Peter  i have included it for you below there is also a link here for the parts if you cant find what your looking for just ask and i will list it for you 

    Hi andrew duncan  the lock for this hotpoint wml520 model is this one in the picture just click on it to see it. there is a pattern and a genuine. ive include some helpful videos below 

    Hi Richard  First things first these don’t look worn but i can only see one.These are the one’s you need for your Hotpoint wml520 p(uk).r  with this welling HxGM1L.51 160021478.04 motor you will see the mounting pins are the same and the brush angle is correct, I have included the video below for you to replace the old one’s

    Hi Joan  These are the one’s you need for your welling HXGM8I 16002147803 motor you will see the mounting pins are the same and the brush angle is correct, I have included the video below for you to replace the old one’s they will show you how to remove and fit the new one’s. Just click on image to