NEW REPAIR GUIDES

FORGOT YOUR DETAILS?

AEG L99699HWD washer dryer tumble dryer not drying cloths on auto settings

by / Friday, 19 June 2020 / Published in

when set to auto dry, the washer dryer leaves clothes damp like the drying cycle only run for 1/2-1 hour. can take 4 hours to dry on manual(cupboard dry)

Barry Litzow

Paul answers

I will try and help with your AEG L99699HWD tumble dryer fault

first, be aware there were 4 different models of this machine.

L99699HWD 914605901 00 20140403 
L99699HWD 914605901 01 20150409 
L99699HWD 914605910 00 20150729 
L99699HWD 914605910 01 20170614 

I think this may be a sensor fault although it is possible that it is maybe the circuit board, I have included a wiring diagram to try and assist you, it is very difficult without having the machine in front of me for me to point you in the right direction, but methodically go through all the sensors and test them, also it is a good idea to go through the heater Matrix and make sure you clean it well. to much fluff in the heater system and condenser plate will also cause problems

If you need any further assistance please feel free to contact me​. all the best Paul​.

photo  
Paul Charmbury
Appliances Engineer
youtube facebook google+ beer

AEG L99699HWD tumble dryer spare parts

Our How-to-repair stores

Current page 1 Total pages 0
  • Tumble Dryer Temperature Sensor NTC Probe : K276 3792171203 1242940102

    Category: Recycle Appliances

    £8.30
  • Washing Machine Pressure Switch 3792216040

    Category: Recycle Appliances

    £13.65
  • Genuine Washing Machine Drive Belt Poly-Vee Drive Belt - 1196J5PJE

    Category: Recycle Appliances

    £5.15
  • Genuine Washing Machine Electrolux Interference suppressor 10A 3792740007

    Category: Recycle Appliances

    £8.50
  • Genuine Washing Machine Drain Pump Askoll 1326911102

    Category: Recycle Appliances

    £26.35
  • Washing Machine Pressure Switch 1328195019

    Category: Recycle Appliances

    £11.65
24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP