Beko WDR7543121 E13 error motor not turning
I have a fault with my washing machine it is coming up with E13 error code, the drum is not turning and I cannot select any program, would it be possible for you to have a look at the machine to see if you can find the problem
Malcolm
I will try and help with this problem WDR7543121 BEKO 7kg-5kg Washerdryer Washing Machine
As you can see in the photographs the first thing you need to do is make sure the connections on both circuit boards are firmly connected, then it is a good idea to put the machine into the test sequence to see if you can retrieve an error code, if e13 is showing then there is a good chance that you have a faulty motor or a problem with the circuit board or possibly a broken wire. I have put the photographs of your repair below to show you the damage that was caused to the pcb, it took a few hours to work it out but after soldering the connections it is up and running again.
Fault finding
- Machine washes poorly It ends the program possible E13 or E11 error code
Check the following
- Check all Communication cables for open circuit
- Then follow tests Is there E13 error?
- Are main board (KN2 socket) and Motor Communication sockets (KN3 sockets) attached?
- If connections are all good test motor and inspect the circuit boards for damage
- Repair the socket and cables or board.
- Test again
-
Beko Washing Machine Door Handle & Hinge Catch: how to replace
-
Beko washing machine not starting how to replace the door lock interlock
-
Beko washing machine wmb 7, 8, 9 Series diagnostic & test mode
-
Beko washing machine self test & diagnostic mode
-
How to replace Beko Washing Machine Motor Carbon Brushes
-
How to Unblock or Replace Beko Washing Machine Pump
-
How to Replace Beko washing Machine Door Seal
Hello. I have an 8 kg washing machine model Htv8633xso. It turned off in the middle of work. The problem is with the main board. The model of the board is TERMA_MB_G08. If you want, I can take a picture of my board. Do you think it is better to make a new board or repair its own board?
All function are working but main moter is not working and moter is oky