indesit lWD145S(UK) washing machine can,t open door and display shows 0:01
Hi Paul I would appreciate your help. My washing machine completed a wash cycle but then ended with the display showing 0:01 and the red light for the door on, so couldn't open. I switched the power off and eventually got the door open. I emptied the clothes put the washing machine on a spin cycle, and other short wash cycles, with no clothes, they all had the time displayed but no turning of the drum. All of the cycles I tried finished with the display showing 0:01 and red light for door so I couldn't open.I assume I have a programme fault, but any help you can give will be appreciated.
Barry
I will try and help with this problem with your Indesit lWD145S(UK) washing machine
After having a look at this fault it is not showing an error code but I suspect that the carbon brushes in the motor may be worn out, this would be the first thing I would check, also while you're doing the job it is worth making sure you do not have any blockages on the pump system including sump hose. I have included some useful videos for you below to assist you in your repair. let me know how you get on
Hi Paul Thank you for your help and fast response. Whilst I wait for the motor brushes to arrive; I notice there is a soft rubber disc with 2 holes the disc is about the size of a 1pence, it hasn’t any lugs or anything to hold it there, so I wondered if this could cause a problem getting stuck in the pipe, and whether I could discard?
regards
Barry
Sorry I forgot to mention The disc is situated/found between the pump and the outlet pipe.