Zanussi ZWH6120P Washing Machine Starts to fill with water then stops and does nothing
Drain is clear. Inlet water is good. All cycles will start but it always seems to stop filling after Just a few seconds. Goes into Neverland. Just sits there
Lisa
I will try and help with this problem Zanussi ZWH6120P Washing Machine
the first thing you need to be aware of is that there were quite a few different models of this machine whenever ordering spare parts please make sure you use the full PNC number
ZWH6120P | 914579851 | 00 | 20100601 |
ZWH6120P | 914579851 | 01 | 20110204 |
ZWH6120P | 914579854 | 00 | 20100801 |
ZWH6120P | 914579854 | 01 | 20110204 |
ZWH6120P | 914906418 | 00 | 20110428 |
ZWH6120P | 914906418 | 01 | 20120412 |
ZWH6120P | 914906430 | 00 | 20110819 |
ZWH6120P | 914906430 | 01 | 20120418 |
ZWH6120P | 914906432 | 00 | 20110805 |
ZWH6120P | 914906432 | 01 | 20120518 |
without having the machine in front of me this is quite difficult for me to be able to assist you, the first thing I would check is make sure all the water valves are working correctly and the pressure switch is also working correctly, then you will have to work your way through all the major components one by one, I would start by looking at the motor and the carbon brushes then I would check the heating system if the pump is open circuit this may also cause a problem.
-
Zanussi Washing machine won’t empty. How to replace Zanussi Washing machine pump
-
How to test a washing machine motor
-
How to replace Electrolux Washing machine pump that will not empty.
-
How to open Washing machine Filter that is stuck or Jammed
-
How to replace and test Beko washing machine element and Ntc sensor