To order your carbon brushes for your washing machine, you will need the full model number of the ID Plate, which you can normally find on the inside of the door frame or in the rear of the machine. Sometimes you will need the 12 digit number, which is usually prefixed with 12NC in front of

 Beko made washing machines elements and NTC sensors are quite easy to fit and on a lot of models the control board will tell you when something is wrong.

If your Beko washing machine is not emptying or it is filling with water but it´s not draining the water correctly then there is good chance that your Beko washing machine pump has failed or the hoses are blocked.This video will show you how to replace Beko washing machine pump, we are working on a Beko

 If your washing machine is leaking from the front of the door, or the door seal is torn, warped or damaged, or mold has built up at the bottom of the seal and it’s beyond cleaning, it´s time to replace it for a new one.This video will show you in detail how to replace the

  There are a number of reasons why your Bosch washing machine will not spin, watch the video for the 3 main faults.  This video will show you how to find the fault on your Bosch washing machine that will not spin or turn the drum during the rinse cycles.There are 3 possible causes to this.1

How to find your fault on your washing machine.This short guide is designed to outline the most common problems on a washing machine, although many people that read this tutorial are looking for a quick way to find out how to repair a washing machine there are not really any shortcuts. What this guide is

  How to wire up a 6 pin universal ac 240v motor on a washing machine. AEG, Ariston, Baumatic, Beko, Bosch, Bush, Candy, Creda, Electrolux, Hoover, Hotpoint, Indesit, LG, Samsung, Servis, Siemens, Smeg, Tricity Bendix, Whirlpool, Zanussi, ETC

We are always asked about customer’s washing machine not spinning, there are a few reasons this can happen and some are very simple fixes and I will list them below and then go in to more depth. Common washing machine faults that lead to the washing machine not spinning or not spinning properly. There could

   How to replace a mouldy washing machine door seal or one that just has a hole in it.This video is on Hotpoint washing machine and can be used on Indesit, Ariston & Scholtes models.To order your door seal you will need your full model number. (This is normally around the washing machine door frame on

This video will show you how to replace washing machine motor, we are working on a Hoover but this guide is good for Candy, Iberna, Teka, Otsein & Zerowatt, and some other makes of the Candy group. To order your washing machine motor you will need your full model number (This is normally around the