Washing machine door seal and gaskets

If your washing machine has a leak or the seal has just gone mouldy with black marks on it then you might need to replace it and fit a new one

To order your door seal you will need your full model number. (This is normally around the washing machine door frame on a sticker)

If your washing machine has a leak or the seal has just gone mouldy with black marks on it then you might need to replace it and fit a new one.

This video will show you a step by step procedure on how to replace a washing machine door seal or gasket on a Balay, Bosch, Neff or Siemens.

1 – Disconnect the power on the Bosch, Neff , Siemens or Balay appliance. Make sure you’re
unplugged from the mains before you do any work on an electrical appliance.

2 – Remove the lid on your Bosch, Neff or Siemens washing machine.

3 – Remove the tension ring under the rim of the seal at the front

4 – Flip the whole seal into the drum and undo screws the hold the door interlock in place.

5 – Then take of the front panel as in the video, (Everything may be laid out slightly differently on your make and model but it should give you a good idea of how easy it is to replace a Bosch, Neff or Siemens door seal.) you can also see other videos on different makes.

6 – Remove the counter balance weight; this will make the job a lot easier for you.

7 – Remove the tension ring holding the seal to the outer tub or drum.

8 – Reverse of the process to put your new.