Washing Machine Motor Carbon Brushes

If your Brandt washing machine is not spinning or it is filling with water but the drum is not turning then it is a good chance that you Brandt carbon brushes have worn out.
To order your washing machine motor Carbon Brushes you will need your full model number (This is normally around the washing machine door frame on a sticker) and also your motor Type, written on the motor Label.

If your Brandt washing machine is not spinning or it is filling with water but the drum is not turning then it is a good chance that you Brandt carbon brushes have worn out.

This video will show you how to replace Brandt washing machine carbon brushes with a Selni motor, we are working on a Brandt but this guide is good for most makes that have a Selni motor

To take out a motor on a Brandt washing machine might sound scary, but it’s a surprisingly easy to replace and then fit the carbon brushes.

- Remove the back panel.

- Then you need to remove the washing machine belt that is attached to the motor and drum pulley.

- You will now need to remove the bolts that attach the motor to the washing machine drum.

- Release the motor of the drum brackets or lugs, be careful it’s heavy.

- Next you need to remove the old Brandt carbon brushes.

- You need to clean the armature up.

- Fit new Brandt carbon brushes according to the video instruction.