How to replace Teka washing machine motor carbon brushes.

How to replace Teka washing machine motor carbon brushes.

Your Teka washing machine will not spin or fills with water but does not wash is a common fault and could be that the carbon brushes have worn out in the motor.
To order your washing machine motor Carbon Brushes you will need your full model number (This is normally around the washing machine door frame on a sticker) and also your motor Type, written on the motor Label.

If you can´t find it, please Contact Us with your Full Model Number and we will do the work for you!

Pictures of How to replace Teka washing machine motor carbon brushes.

 

Your Teka washing machine will not spin or fills with water but does not wash is a common fault and could be that the carbon brushes have worn out in the motor.

This video will show you how to replace Teka washing machine motor carbon brushes with Indesco or welling motors, we are working on a Teka washing machine that was not spinning.

To take out a Teka motor on a washing machine might sound scary, but it’s a surprisingly easy to replace and then fit the carbon brushes.

– Remove the lid and the back panel.

– Then you need to remove the washing machine belt that is attached to the motor and drum pulley.

– You will now need to remove the bolts that attach the motor to the washing machine drum.

– You now have to remove the old carbons out of the motor see video for this.

 

Common faults that customers complain of on Teka washing machines.

– My Teka washing machine empty’s but does not spin.

– My Teka washing machine fills but does not wash.

– The clothes in my Teka machine are coming out wet.

– There is still soap powder on the clothes, my Teka washing machine does not spin, etc etc.