E21, E22 Error Code, Tumble Dryer Pump Fault AEG, Electrolux, Zanussi Etc

by / Saturday, 13 December 2014 / Published in Pump Systems, Tumble Dryers



This video will help you understand the fault and show you how to replace your pump or float switch.

These error codes are normally related to a Tumble Dryer Pump Fault E21, E22 Error Codes are listed below.


If these fault codes apply to your Tumble dryer it should have a fascia panel on it like one of those shown below, there are four known variants covering quite literally hundreds of different models sold in the UK and across the EU.

Tumble Dryer facial panel types

Tumble Dryer facial panel types


These error codes are for ENVo6 Cuirct boards tumble dryer  Electrolux, AEG, Arthur Martin, Elektro Helios, Eureka, Faure, Frigidaire, Gibson Appliance, Husqvarna, Kelvinator, Marijnen, Parkinson Cowan, Progress, Simpson, Tornado, Tricity Bendix, Volta, Westinghouse, Zanker, Zanussi & Zoppas.


Canister fill pump triac faulty.

Possible fault Wiring faulty; Electronic board faulty. Cycle interrupted. OFF


Triac “sensing” circuit for the canister fill pump faulty

Possible fault Electronic board faulty. Cycle interrupted. Machine Status/Action

19 Responses to “E21, E22 Error Code, Tumble Dryer Pump Fault AEG, Electrolux, Zanussi Etc”

  1. peter heath says : Reply

    GREAT website YOU HAVE MY FULL SUPPORT I will certainly purchase spares from your site should I need any in the future, as you know good repair information for white goods is impossible to find out there. yours is the only one I could find.
    Ever considered putting a DVD out covering all this really good tech info ?
    Kind Regards Pete

  2. Jillian Turkington says : Reply

    I have an Whirlpool condenser tumble dryer with an E22 code flashing could you please advise

    Many thanks

  3. Kayleigh Button says : Reply

    My hoover
    Tumble is blowing cold air out and it’s flashing e21

  4. Georgie says : Reply

    My hoover dynamic next tumble dryer is flashing Eel could you please help?

  5. Georgie says : Reply

    Sorry that was meant to say flashing E22

  6. Jody Gibson says : Reply

    10kg condenser showing e21

  7. Declan Healy says : Reply

    Hi, My Candy Grand O Vita condenser tumble
    dryer (model: GVS C10DE-80) is giving error E21. I have cleaned the condenser and left it dry and also left the machine unplugged for ages. I could not find a service manual online . I have an electrical background so I have no problem checking stuff. I just need to know what to check and where it is located inside the dryer. The dryer is 13 months old.

  8. Suzie says : Reply

    My Hoover dynamic next rumble dryer is showing E22, what does it mean?

  9. ben williams says : Reply

    I have a hoover condenser dryer. Model HL C8DCG-80. It’s starts for minute then error code 22 comes up on it.

  10. Chris Tanner says : Reply

    Hi. I have a Hoover condenser dryer model number HL C8DCG-80 , Type TCE01, the machine has stopped and is displaying an error code E22, do you know what this is related to? Many thanks.

  11. James Gracey says : Reply

    Hi there I have a hoover dynamic next one touch condenser dryer that has stopped working I took it all apart and cleaned everything that I could as it was absolutely full of lint. But I still can’t get it to work is ther any advice you can give me as I really can’t afford to go but a new one just at the moment.

  12. Alonzo says : Reply

    Pretty element of content. I just stumbled upon your website and in accession capital to claim that I acquire actually loved account
    your Blog post content Writing service posts.
    Anyway I will be subscribing for your augment and even I success you get entry to consistently quickly.

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.