Hi Alan!I have come across this before, on this occasion it was a small sock That was jammed in the Gap at the front by the door seal it was not visible but with a bore scope I was able to see it and using a metal coat hanger I was able to hook it

    Hi Duncan good morning Duncan on this model of machine they have fitted two different types of motor and therefore you need to inspect the carbon brushes to make sure the location lugs are correct and also the angle all the carbon brush is the same as your existing one if you get stuck send me

    Hi Chris yes we do do call outs but only in the south wales area please see map below and if you are in the area please contact us  

    Hi Charles this is the water valve with some dirt in it or the valve has worn. you need to find out which valve is leaking these are the valves for your model Hotpoint WML730videos below to help you 

    Hi Paul O’Riordan  i think you mean model zwf1012w seal you have only two choices fit through the door hole or take drum out sorry on this model, i have done it many times but i show in the videos me taking the front of so people can see.but it is very hard if you have not done

    Hi Paulyou might find you have a blockage or you might need a new pump video to help you fit is below. or there may be a problem with the rinse water valve.if you need parts see the link  i have put to your model number.i hope this helpsyour pump is below if you need

       Hi chrisSamsung washing machine Does is not taking in any water.- these are all water valve related or pressure switch related, see videos on this below. 

    Hi  Heidi I would check for motor faults first the carbon brushes on your Beko WM7355S they could need changing, see videos below. I have also included some useful links here To try and help with this problem on your Beko washing machine, I have put together a full list of videos below on your washing machine. There

    Hi James  first the grinding noise could be the bearings or something stuck in the drum you need to check this see videos below. 2nd the machine could stick in cycle for a few reasons water valve not working, not pumping out, heater may have gone open circuit or the pcb may have failed you need to

         Hi ED If your Hoover WMH147DF/2-80 washing machine is not spinning then don’t use the machine until you have changed the carbon brushes as you can do damage to the motor and the pcb, they fitted two different motors so please send motor type and a couple of pictures of the carbons will help me identify which motor