Maxine goes through cycle without spinning it fills and empties though. Before this happened washing machine had developed a terrible rumbling noise machine is about 2-3 years old

Hi Paul……. I have replaced the element and HTC sensor to no avail, the water is still not heating up. Any suggestions?
Thank you & regards……. Peter

Just about to order the relevant interlock from your site can you confirm this fits my model

My machine is completely dead. is it the PCB?

    Hi Terence the lock is in the link on right and i have added  these videos below that will help you  

    Hi Thet the error is F12- Heater element short circuitCheck water heating elementCheck relay if fittedCheck wiring to heating element and PCB connection  this video below will help you with your whirlpool awz7813 tumble dryer

      Hi Carole If your Siemens WM14E461GB/43 washing machine is leaking from the front of the door, it sounds like you need to replace your door seal or gasket. To try and help with this problem on your Siemens  machine, I have put together a full list of videos below on your washing machine.Also if you need a

    beko wtv7531x0 not spinning To try and help with this problem on your Beko washing machine, I have put together a full list of videos below on your washing machine. There are many common questions that people ask about these Beko´s. Please have a look at the relevant video to your problem, and if you need

    Hi Iweka It looks like you have a hole in the seal, If this is the case, it´s a very simple repair see videos below and the part you need is on the link here,   

    Hi PiarasI would check for  movement in the bearings on the drum also if the machine is not emptying in correct amount of time this can cause the machine to shake, see videos below. I have also included some useful links hereif you need spares for this model you will need model and serial number