John Lewis Electrolux Tumble Dryer JLTDH16 – 916 097 062 No power
Heat pump. No power. Checked supply, checked fuse. Happy to strip out. Already looked once a pcbs. No burns. Ex service engineer. Need guidance. Happy to buy a beer.
Kevin Mcpheat
I will try and help with your John Lewis Electrolux Tumble Dryer JLTDH16 problem.
If you have no power at the PCB but you do have 240 volts going into the electronic filter at the rear right-hand side, then I suspect you might have a problem with the printed circuit board sometimes you will not visually see any damage but there may be a resistor or diode that is blown
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
Common John Lewis Electrolux Tumble Dryer JLTDH16 faults with links to the right repair guide
I have included a lot of videos in the links below on these tumble dryers to assist you in repairing your tumble dryer; I have also included an exploded diagram of your machine with all the parts that you need listed below that just click on the relevant and it will take you to a search result
- No heat
This is the most common fault on tumble dryers.
Vented dryers: this can be a fault with the thermostats, heater, or on some occasions, it might be the timer or the relay on the printed circuit board.
Condensor dryers: this might be any of the above but you also have a condenser plate that collects the water and then is either pumped to the collection tray or flows into a tank. Check pump unit and float switches.
Heat pump dryers: these are much more complicated they use a refrigeration prosses to heat the cloths and use the cooling side to condense the water for collection. Check compressor is running, check NTC sensors and check filters, and also that it has the right amount of refrigeration gas (normally only done by an engineer)
- Drum not turning
This will stop the dryer from drying. You may have to replace a faulty belt or in other cases, look at the motor, motor capacitor, or the jockey wheels. Again there are relays on printed circuit board types that can go faulty.
- Not starting
Whilst, not a common problem, you may have a faulty door switch, starter relay if fitted, or can be start button or PCB.
- Noisy Machine
This is usually caused by faulty bearings, jockey wheels or worn felt pads. The motor can get dust build up in the bearings, also the fan blades can distort in shape and make noise rubbing the housing.
- Water leaks.
This can be a simple as the water tank (in a condenser tumble dryer) has not been emptied, or not placed back into the housing correctly. The condenser plate can need cleaning. The pump unit might not be working. Or the ducting system can be clogged with fluff etc. See servicing tumble dryer.
- Tumble dryer reports a fault code or error code.
Error codes can be on the display or given in certain lights flashing sequences. Tumble dryer fault codes are not universal but may only point you or an engineer in the right direction they are not 100% accurate they are only that for guidance. Your owner’s manual may help you identify the problem and even suggest a fix. In other cases, you’ll need an engineer to trace the fault. Don’t be tempted to ignore a fault code, even if the dryer seems to be functioning normally. Some codes are ‘early warning signs’ and fixing the machine at an early stage could save you time and money in the long run.Contact us with the full model number and detailed description
-
Beko Washing Machine Door Handle & Hinge Catch: how to replace
-
Beko washing machine not starting how to replace the door lock interlock
-
Beko washing machine wmb 7, 8, 9 Series diagnostic & test mode
-
Beko washing machine not filling with water Error code E08
-
Beko washing machine self test & diagnostic mode
-
Beko WM5101W Washing Machine Test Mode & Error Codes
-
How to Replace Beko washing Machine Door Seal
Match your part for John Lewis Electrolux Tumble Dryer JLTDH16 and use reference number in list below and click on the link to your part
Reference | Part Number | Description |
---|---|---|
200 | 1366030607 | DRUM,COMPLETE,435.4MM |
201 | 1366099008 | DRUM LIFTER,GREY,3 PCS.,298.3M |
202 | 1366033007 | DRIVE BELT,L=1971MM |
203 | 1368089205 | GASKET,BACK,LARGE OPENING,19.5 |
204 | 1368089304 | GASKET,FRONT,LARGE OPENING,17. |
205 | 1366238002 | CONE |
206 | 1366237012 | CONE,BASE |
207A | 1366339024 | FLUFF FILTER |
208 | 1366063004 | GASKET,FRONT,LARGE OPENING |
335 | 1364169001 | ASSEMBLY,ROLL,CHANNEL DRAINAGE |
514A | 1254250010 | BUSH,SUPPORT,ROLLER |
999 | 1240222016 | SCREW,MOTOR |
Reference | Part Number | Description |
---|---|---|
001 | 1360166126 | COMPRESSOR,COMPLETE,KIT,39F113 |
002 | 1125421204 | COOLING FAN,COMPRESSOR,240V,28 |
004 | 1366146031 | MOTOR,HP,PMM,P10 |
006 | 1258349214 | PUMP,CONDENSATION |
011 | 1240344612 | CAPACITOR,18UF |
012 | 1366140018 | MICROSWITCH,FLOAT |
015 | 1366111100 | DOOR SWITCH |
021 | 1366114013 | DOOR,LOCK |
022 | 1366029104 | HUMIDITY SENSOR |
023 | 1366113106 | CABLE DUCT,POWER CABLE |
024 | 1366533006 | TENSION SPRING,MOTOR |
030A | 1366338026 | FAN WHEEL,FRONT |
032 | 1366043006 | FIXING BRACKET,MAIN MOTOR,FRON |
033 | 1366350005 | FIXING BRACKET,MAIN MOTOR,REAR |
048C | 1242940102 | TEMPERATURE PROBE,NTC |
251 | 1251060008 | MOTOR,BUSHING,KIT,FRONT+REAR |
263 | 1250125034 | CLAMPING ROLLER,ASSEMBLY |
514 | 1251061006 | BUSH,MAIN MOTOR |
514A | 50278238006 | MOTOR,BUSHING,KIT,FRONT+REAR |
523B | 1366360004 | SUPPORT FRAME,FOR,COMPRESSOR |
584 | 1366244000 | BRACKET,ELECTRONIC BOARD,INVER |
585 | 1366245007 | COVER,ELECTRONIC BOARD,INVERTE |
586 | 1366240214 | INVERTER,ELECTRONIC BOARD |
587 | 1366100111 | NOT CONFIGURED ELECTRONIC,EDR1 |
587 | 973916097062012 | CONFIGURED ELECTRONIC,EDR10621 |
587A | 1366203865 | USER INTERFACE BOARD,S.8,P10,H |
588 | 1366108015 | COVER,ELECTRONIC BOARD |
999 | 1360543001 | GASKET,TERMINAL COVER,OVERLOAD |
999 | 1364063006 | OVERLOAD CUT-OUT |
999 | 1366039004 | LAMP,LED |
999 | 1366119319 | POWER CABLE,GBR,1670MM,3X1.0MM |
999 | 1366148029 | ANTI-INTERFERENCE FILTER,HP2C |
999 | 1366152005 | WIRING HARNESS,AIR DUCT |
999 | 1366154027 | HARNESS,WIRING |
999 | 1366160131 | HARNESS,TEMPERATURE PROBE,TANK |
999 | 1366161006 | HARNESS,DRUM LIGHTING,DOOR LOC |
999 | 1366162004 | HARNESS,USER INTERFACE BOARD,P |
999 | 1366164018 | HARNESS,HUMIDITY SENSOR,PCB-J3 |
999 | 1366172029 | WIRING,BASEMENT |
999 | 1366174116 | HARNESS,ANTI-INTERFERENCE FILT |
999 | 1366190005 | HARNESS,COMPRESSOR,EARTH CONNE |
999 | 1366191003 | HARNESS,COMPRESSOR,PCB-J11 |
999 | 50224329008 | NUT |
999 | 50681033002 | DISC |
Reference | Part Number | Description |
---|---|---|
110A | 1366055109 | HOSE,PUMP,TANK,1130MM |
110B | 1366054102 | OVERFLOW HOSE,L=640 |
111 | 1366035002 | TUBE HOLDER |
131 | 1366056008 | SEALING,AIR DUCT,BASEMENT |
320 | 1366017000 | SUPPORT,TANK |
321 | 1366018024 | TANK,UPPER |
322 | 1366028015 | CONNECTOR,TANK |
323 | 1366069001 | BUSH,TANK |
400A | 1366665014 | BASEMENT,ASSEMBLY,HP,CONGO |
403A | 1366336012 | PUMP,SUPPORT |
405A | 1366337010 | COVER,PUMP,FLOAT |
406A | 1366346003 | GASKET,DOOR,BASEMENT |
407A | 1366347035 | DOOR,BASEMENT,GREY,HP |
408A | 1366348017 | KNOB,DOOR LOCK,BASEMENT,7801 |
411 | 1366344032 | FILTER,BASEMENT,HP |
412 | 1366345005 | GASKET,DOOR,FILTER,HP |
418 | 1366349015 | FILTER,BASEMENT,SMALL,HP |
419 | 1366356010 | BRACKET,WIRING |
420 | 1366343026 | DRAWER,BASEMENT,GREY,HP |
421 | 1366357026 | BRACKET,WIRING |
999 | 1256672203 | FIXING CLAMP,TUBE,CRM, D13.3MM |
Reference | Part Number | Description |
---|---|---|
121A | 1366363032 | COVER,BACK,AIR DUCT |
330 | 8996470604712 | FOOT *NLA* |
350 | 1367004056 | FRONT PANEL,KIT,HP,P10 |
351 | 1366005443 | BACK PANEL,ASSEMBLY,SAHARA,P10 |
352 | 1363016302 | SIDE PANEL,INSULATION,WHITE,47 |
352 | 1363016401 | SIDE PANEL,INSULATION,WHITE,47 |
353 | 1366130118 | WORK TOP,ASSEMBLY |
354 | 1366015012 | REINFORCEMENT,TOP |
355 | 1366016002 | REINFORCEMENT,MIDDLE,TOP |
356 | 1366046025 | BRACKET,WIRING |
357 | 1366089009 | COVER PLATE,DOOR LOCK |
360 | 1364289007 | AIR DUCT,FRONT,LAMP |
361 | 1366058012 | SUPPORT,HUMIDITY SENSOR |
362 | 1366061008 | GASKET,FILTER |
370A | 1366340014 | FRONT PANEL,PLINTH |
371A | 1366341012 | DOOR,PLINTH,KIT |
372A | 1366342002 | DOOR,PLINTH,KIT |
373 | 1123311100 | HINGE PIN,DOOR,PLINTH |
374 | 1366081006 | SPRING,DOOR,PLINTH |
375 | 4055123600 | PUSH BUTTON,DOOR,PLINTH |
376 | 1366023008 | SUPPORT,PLINTH,DOOR OPENING BU |
999 | 1369207228 | USER MANUAL,EN |
Reference | Part Number | Description |
---|---|---|
500 | 1328360019 | KNOB,COVER |
500A | 1366128005 | KNOB |
510 | 1367019005 | CONTROL PANEL,UNIVERSAL,S.8N,P |
510A | 1366222006 | HANDLE,TANK |
510B | 1367040126 | INSERT,CONTROL PANEL,JOHN LEWI |
571 | 1366126009 | PUSH BUTTON SET |
572 | 1366125001 | PUSH BUTTON,ON/OFF |
573 | 1366124004 | SUPPORT,BUTTONS |
575 | 1366228102 | DIFFUSER,LUMINOUS DIODE,KNOB |
576 | 1366232005 | DIFFUSER,LUMINOUS DIODE |
Reference | Part Number | Description |
---|---|---|
360 | 1366012019 | DOOR,FRAME |
361 | 1366011003 | OUTER DOOR,COVER |
362 | 1366098018 | INNER DOOR |
363 | 1366253134 | DOOR HINGE,PLASTICDOOR |
364 | 1366048005 | DOOR HINGE,REINFORCEMENT |
366 | 1366367009 | TAPPET,DOOR |
367 | 1366254009 | BUSH,HINGE,15,75MM |
370 | 4055237731 | DOOR HANDLE,KIT |