Hoover Tumble Dryer HL C9LG-80 Rear heater housing fills up with water
Hi there, A tumble tumble dryer I bought to fix was having tripping issues after a few hours use. Found condensation building up in the rear heater housing at the bottom and the air circulation impeller was flicking it up onto the heater unit causing it to trip off the circuit. Stripped down dryer and inspected all air ducts, tested sensors, cleaned condenser everything I could think of plus what’s recommended online. Got it back together and was working a treat, but after a few hours water had built up again in the rear heater housing at the back and at a loss really. Rooms not hot or cold as I know this can effect condenser dryers and it’s ventilated well. Any advice or something I’ve not thought of?Many Thanks
Michael Dooks
I will try and help with this problem Hoover HL C9LG-80 tumble dryer 9kg Rear heater housing fills up with water
I have come across this on a few occasions this is normally down to either the tumble dryer not being situated in the correct climatic conditions where the condensing process is not working correctly, ( This rules out the installation in garages, basements, attics, closets, balconies, terraces and the like.)
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
-
How to service a Hoover Candy condenser tumble dryers
-
Tumble dryer not heating Hoover Candy diagnosing fault and repair
-
Noisey Tumble dryers, Rear drum bearing on , Candy, Hoover, Iberna, Kelvinator, tumble dryers
-
How to replace a tumble dryer belt Hoover or Candy
-
Hoover Candy Tumble dryer all lights flashing error fault code
Hoover Tumble Dryer HL C9LG-80 use reference number in list below
also note if the back wall on the tumble dryer is very cold the condensing process can take place in the heater assembly you will see in one of the technical notes I have addeded below.the manufacturer has made some changes on certain models
HLC9LG-80