Blomberg washing machine is not spinning, How to replace carbon brushes.

by / Thursday, 27 March 2014 / Published in Motors, Washing machines




Blomberg washing machine is not spinning, How to replace carbon brushes.

This video will show you how to replace Blomberg washing machine carbon brushes with a Selni motor, we are working on a Blomberg but this guide is good for most makes that have a Selni motor.
If your Blomberg washing machine is not spinning or it is filling with water but the drum is not turning then it is a good chance that you Blomberg carbon brushes have worn out.
To order your washing machine motor Carbon Brushes you will need your full model number (This is normally around the washing machine door frame on a sticker) and also your motor Type, written on the motor Label.

replacing-Selni-motor-carbon-brushes-on-Blomberg-Brandt-Fagor-De-dietrich-Thomson-etc

Selni motor carbon brushes on De dietrich, Thomson, Creda, Edesa, Indesit, Ocean, Siemens, Savema, Vedette.

How-to-replace-Selni-motor-id-label-on-Blomberg-Brandt-Fagor-De-dietrich-Thomson-etc

old-and-new-Selni-motor-carbon-brushes-on-Blomberg-Brandt-Fagor-De-dietrich-Thomson-etc




 

This video will show you how to replace Blomberg washing machine carbon brushes with a Selni motor, we are working on a Blomberg but this guide is good for most makes that have a Selni motor

If your Blomberg washing machine is not spinning or it is filling with water but the drum is not turning then it is a good chance that you Blomberg carbon brushes have worn out.

To take out a motor on a Blomberg washing machine might sound scary, but it’s a surprisingly easy to replace and then fit the carbon brushes.

  • Remove the back panel.
  • Then you need to remove the washing machine belt that is attached to the motor and drum pulley.
  • You will now need to remove the bolts that attach the motor to the washing machine drum.
  • Release the motor of the drum brackets or lugs, be careful it’s heavy.
  • Next you need to remove the old Blomberg carbon brushes.
  • You need to clean the armature up.
  • fit new Blomberg carbon brushes according to the video instruction.

2 Responses to “Blomberg washing machine is not spinning, How to replace carbon brushes.”

  1. jim thompson says : Reply

    my blombergwnf 7341a has suddenly stopped spinning when it reaches that point in the programme (ALL)

  2. Stephen says : Reply

    These are the kinds of videos that are very helpful. In so many videos they seem to like to hear themselves talk or move so slow as to make it painful to watch or give way to much information. This video is to the point and assumes that the person repairing the machine has some mechanical ability and sort of understands basic processes. Very good.

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP