Haier washing machine not spinning: How to replace motor carbon brushes

by / Wednesday, 26 March 2014 / Published in Motors, Repair Guides, Washing machines




How to replace Haier washing machine motor carbon brushes with Indesco or Welling motors.

Washing Machine Carbon Brushes

This video will show you how to replace Haier washing machine motor carbon brushes with Indesco or Welling Motors, we are working on a Haier washing machine that was not spinning.

To order your washing machine motor Carbon Brushes you will need your full model number (This is normally around the washing machine door frame on a sticker) and also your motor Type, written on the motor Label.

Testing-Indesit-Haier-Teka-Samsung-washing-machine-after-fitting-brushes

set of motor carbon brushes

Adjusting-the-belt-on-Indesit-Haier-Teka-Samsung-washing-machine

Fitting-the-motor-brushes-correctly

Lifting-the-drum-to-fit-motor-bolt-on-Indesit-Haier-Teka-Samsung-washing-machines

Fitted-washing-machine-motor-carbon-brushes-in-a-Indesco-welling-motors

Motor-manufacture-on-Indesit-Haier-Teka-Samsung-washing-machines

Cleaning-commutator-on-Indesco-welling-motor




 

Your Haier washing machine will not spin or fills with water but does not wash is a common fault on Haier machines and could be that the carbon brushes have worn out in the motor.

This video will show you how to replace Haier washing machine motor carbon brushes with Indesco or welling motors, we are working on a Haier washing machine that was not spinning.

To replace Haier motor carbon brushes on a washing machine might sound scary, but it’s a surprisingly easy to replace.

- Remove the lid and the back panel.

- Then you need to remove the washing machine belt that is attached to the motor and drum pulley.

- You will now need to remove the bolts that attach the motor to the washing machine drum.

- You now have to remove the old carbons out of the motor see video for this.

To take out a Haier motor on a washing machine might sound scary, but it’s a surprisingly easy to replace and then fit the carbon brushes.

Common faults that customers complain of on Haier washing machines:

- My Haier washing machine fills but does not wash.

- My Haier washing machine empty’s but does not spin.

- The clothes in my Haier machine are coming out wet.

- There is still soap powder on the clothes, my Haier washing machine does not spin, etc etc.

6 Responses to “Haier washing machine not spinning: How to replace motor carbon brushes”

  1. Marina Stevens says : Reply

    Hi there my haier washing machine 6kg dosent seem to spin ..it washes nd drains but not spinning excess water out ..nd then just stops!!
    Just inquiring wat cldit be or wat fo I do too fix it ..I hve been told many things saying there could be blocked ..your suggestions wld be greatly appreciated ???? thankx

  2. margaret cole says : Reply

    my washing machine is not spining properly or draining all water out clothes still soaked i have cleaned filter at the front of machine and now have taken other hoses oh they seemed to have what was like limescale pieces i front filter and other hoses . now my question is should the while fan looking part spin freely when you turn it [on pump i think ] mine seems to click round . i suppose what im asking is if its damaged the pump would it work at all . also the belt seems to be ok what else can go wrong due to blocked pipes thanks maggie

  3. Ora Takarua says : Reply

    My brand new Haier top loading washing machine is not spinning the clothes the way it should? Also I cannot respin without going through a whole wash cycle? It came direct from Fisher/Paykeln today?

24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP