I’ve just replaced the drain pump on above dishwasher but it still is not draining? Can you help advise what I may not have done or what else might be the problem? Thanks

Hi Paul, my DW started tripping RCD a couple of days ago then showed fault E01, removed from unit, panels off tipped back, water ran out. Tried to dry out as best as poss. Left for a day turned on it then started filling with water only then stopped and showed fault E15. Now starts program but pump wont engage and showing error code E23. Had control board out but no obvious issues, not wet or damaged. Hope you can help. Many thanks, P.

    Hi ArneIt looks like you have a blockage or a faulty pump. See related videos below. i will need your model number to be able to help you  To try and help with this problem on your Bosch Dishwasher: SuperSilence I have put together a full list of videos below on your dishwasher. There are many

    Hi Mark hi mark there are two pumps in the machine main motor pump and also drain pump which do you need i have put some diagrams below on your model to help you. See related videos below to help you fit parts and find common faults.   and if you need more help, feel free to come

    Hi RoyIt looks like you have a blockage or a faulty pump. See related videos below.  To try and help with this problem on your Bosch SMS69L09uk/15 I have put together a full list of videos below on your dishwasher. There are many common questions that people ask about these Bosch’s. Please have a look at

    Hi Paul  please see video that might help you and diagram is belowBosch dishwasher pumps  

    Hi Andy  please see video on impeller jugs but this is what might be wrong http://www.how-to-repair.com/dishwasher-water-inlet-177390.html  

    Hi Gregory I have had a lot of problems with these ADP and  ADG type dishwashers the fill chamber on the side of the machine can clog restricting the flow of water in and the the machine times out, also the water valve can fail but not that often. the main thing is that if the

    Hi Gary Eganhi from what you are saying i still feel it might be the flow valve! did you fit it the right way round as the is normally an arrow on them showing water direction

    Hi Chris you will need to work out which pins are for the motor and which are for the heating side i have not got a video on this yet but i have put it on the list.There are also thermostats that might be causing the problem, also check that the are no bad connections and