BOSCH MAXX9 WAP28360GB/14 CONTROL PANEL SWITCHING OFF NO FAULT CODE

SWITCH ON MACHINE AND SET PROGRAM AFTER ABOUT 30 SECONDS THE CONTROL PANEL SWITCHES OFF/BLANK , TRIED 15 MINUTE WASH FILLED STARTED TO HEAT AND WASH THEN AS ABOVE PANEL SWITCHES IT SELF OFF ,EVERY TIME I SWITCHED OFF SUPPLYTO RESET BEFORE TRYING AGAIN, CHECKED CONTROL BOARD /PLUGS/WIRING LOOKS OK ?? SEEMS TO ME A FAULTY COMPONENT SOME WERE SHUTTING MACHINE DOWN BUT WITHOUT A ERROR CODE I AM PUZZLED BE MOST GREAT FULL IF YOU HAVE ANY IDEAS THANKS BOB

ROBERT LEA

I will try and help with this problem Bosch WAP28360GB/14 washing machine

this could be a problem with the main electrical filter breaking down under load, you may have bad wiring somewhere on the machine, or I suspect it may be the programmer that is breaking down under load it is worth checking all the wiring connections going to the circuit board, make sure the wiring around the machine is connected correctly it would only take a loose wire to cause this type of problem. I have put some useful videos below and also an exploded diagram of the machine with a full list of parts underneath that I hope this helps you

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page