NEW REPAIR GUIDES

FORGOT YOUR DETAILS?

AAH, WAIT, I REMEMBER NOW!

Hotpoint tcl770P Tumble Dryer I think the heater is shot

by / Thursday, 22 March 2018 / Published in

Hi paul..Spoke with you earlier - just to recap I cannot get a ohm reading through the ntc sensor - buty could be down to difficulty with the meter connection,,many thanks for your helpbest Tom

tom mccarthy

Paul answers

I will try and help with this problemĀ Hotpoint TLC770P Tumble Dryer

I have just done some research on your tumble dryer and it was a couple of different type of heaters fitted to this model of the machine. I have listed them both below for you, please make a note. There are two different types of wiring connections one has two connectors one with five wires one with two wires. The other has a 5 wire connector and two separate wires. I have also listed some videos below to assist you with your repair if you need any further assistance please feel free to contact me.

Ā 

If you need any further assistance please feel free to contact meā€‹. all the best Paulā€‹.

photo Ā 
Paul Charmbury
Appliances Engineer
youtubeĀ facebookĀ google+Ā beer

List of spare parts for Hotpoint TCL770P Tumble Dryer

Our How-to-repair stores

Current page 1 Total pages 0

  • Tumble dryer Motor

    Category: Recycle Appliances

    Ā£40.00

  • Ariston Creda Hotpoint Indesit Swan Tumble Dryer Tear Drop Bearing 18038

    Category: Recycle Appliances

    Ā£9.90
24h technical help answers

Questions on faults in the comments will not be answered. Please use the contact us form instead.

TOP