Hotpoint Washerdryer Aquarius WD420P ?Stuck in cycle?
On behalf of a neighbour:Running programme "K"Cycle appears to have stopped.On/Off Light flashingDrying High Heat Light flashingRinse Hold Light flashingI cannot find an error code for that sequence of lights online.Have tried switching off (several minutes) and waiting for 40 seconds after switching back on. Get Wash Light on, then sound of filling, then immediately sound of draining, then back to same flashing lights. There is a continuous noise of some sort but I do not recognise it.We are on an island off an island and so getting an engineer is both problemmatic and expensive. Cheaper by far to buy a new washing machine.Your help if possible) greatly appreciated.
Robertson Mac Cormick
I will try and help with your Hotpoint Washerdryer WD420P problem
As you say this is not an actual area code, but if you say you managed to get in the machine working and then it filled then emptied straight after but the drum did not turn it would suggest to me one of two faults, either you have a problem with the carbon brushes in the motor or the motor itself, or you may have a problem with the heating system please check both of these I’ve also added videos below to assist you
Please note: there are 3 models for the reference you indicated us. WD420P, WD420G and WD420T. For the schematics and parts list below we used model WD420p. The only difference will be the color or the cabinet parts. WD420p is the polar white versions. If you need cabinet parts make sure you are buying the correct color for your specific model.
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page
Common Hotpoint Washerdryer WD420P faults with links to the right repair guide
- The machine won’t fill with water
Make sure the door is properly closed, check that inlet hoses are clear and not kinked and that the water supply is connected and functioning. Water valve may be faulty See our video on water valves
- The drum doesn’t turn
There are a number of things that can cause this, including worn carbon brushes, drive belt problems, or a faulty motor or control unit PCB. On new machines with 3 phase motors or inverter motors, they get a lot of control board faults
- The machine stops mid-cycle
This generally means that the timer, thermostat, or heater had failed. The washing machine may stop due to these faults or the water rinse valve may be faulty or the machine has not emptied the water out of the drum in an allocated period of time.
- The washing machine is noisy
A rattle, while the drum is moving, could be due to something stuck in the drum, coins and bra wires are common culprits. You may be able to remove the drum paddles to get to the offending item or remove the sump hose or heater. It’s also worth checking the drain filter to make sure that’s clear. A noisy washing machine may also indicate failed or worn bearings or drum spider. Try turning the drum by hand when the machine is empty. If you hear a rumbling noise or can feel ‘play’ in the drum, it’s likely that the bearings need replacing. You can also get drum spring or shock absorber problems.
- Water not draining from the washing machine
This usually means there’s a blockage in the drainage filter, or the pump itself has failed. The first thing you’ll want to do is empty the water so you can rescue your laundry. Pull out the drain hose, pop it into a bucket and let gravity do the work. Also, check the sump hose and waste pipe if fitted to a sink unit the problem can also be the connection.
- The washing machine won’t spin
Problems with the spin cycle are relatively common washing machine faults, if your machine knows there is water still in the drum it will not allow the drum to spin it must empty in an allocated period of time. The good news is that they’re generally relatively inexpensive and simple to fix. Balance sensors will override the cycle if the clothes are unevenly distributed and could cause the machine to vibrate. This can happen if you’ve overloaded the washer, or if you’re trying to spin just a few items. Try reloading light loads or removing a few items from heavy ones. If this fails, motor carbon brushes may need to be replaced. On new machines with 3 phase motors or inverter motors, they get a lot of control board faults
- The door won’t open
This will usually be due to water not draining, or a faulty door lock. Drain manually as above. If that doesn’t fix the problem you may be able to remove the top of the machine and release the lock from the inside see videos.
- Clothes smell bad
If you always use low-temperature washes and biological detergents you could have a build-up of bacteria or even mold in the machine. Try running a hot empty wash once a week. You should also clean out the soap dispenser regularly, and leave the machine door open to air after you’ve removed the washing.
- The washing machine is damaging clothes
Tears in clothes indicate foreign bodies in the machine or damage to the drum.
10.The washing machine is constantly filling with water
-
How to remove a washing machine sump hose and filter to clear blockages
-
How to Remove Items from a washing machine drum like bra wire, coins, screws
-
Hotpoint Ariston aqualtis washing machine will not start how to replace door lock
-
How to Replace a Hotpoint Washing Machine Drum Paddles or lifters.
-
How to Replace Hotpoint Ariston washing Machine Door Handle
-
Washer dryer not heating up on Ariston, Creda, Hotpoint, Indesit, New world and Scholtes washing machines
-
How to replace a washing machine door seal on Hotpoint, Indesit, Ariston & Scholtes
-
How to replace your washing machine motor on Hotpoint, Creda, Etc early models only
Match your part for Hotpoint Washerdryer WD420P and use reference number in list below and click on the link to your part
Reference | Part Number | Description |
---|---|---|
101 | C00202727 | CONSOLE |
104 | C00112601 | DRAWER LATCH |
105 | C00202735 | DISPENSER HANDLE WD420P |
110 | C00112564 | Washing Machine Soap Dispenser Drawer |
113 | C00117136 | Washing Machine Soap Dispenser Tray |
114 | C00115450 | DISP OUTLET HOSE |
116 | C00112605 | HERBIE CLIP |
117 | C00290783 | Washing Machine Soap Dispenser |
118 | C00117139 | DISPENSER HOSE |
120 | C00193617 | Washing Machine Control Knob |
122 | C00112566 | ON/OFF START BUTTON |
123 | C00112608 | Washing Machine & Tumble Dryer On/Off Light Guide |
124 | C00112609 | LIGHT GUIDE STATUS |
125 | C00112611 | OPTION KNOB |
126 | C00112613 | LIGHT GUIDE |
127 | C00112615 | OPTION BUTTON (5) |
130 | C00112613 | LIGHT GUIDE |
132 | C00142393 | FOAM BUTTON PAD |
140 | C00112616 | Washing Machine PCB Assembly |
141 | C00112596 | SCREW 3.5 X 12.7 |
143 | C00115515 | HARNESS CNTL D/LOCK (HL) |
144 | C00118542 | HARNESS MAINS FILTER |
146 | C00203626 | HARNES MOTOR/PUMP (H L) |
147 | C00093724 | VALVES/NTC (J8) |
147 | C00115576 | HARNESS FAN/NTC J10 (HL) |
147 | C00142747 | FAN MOTOR HARNESS MOD.3.5 J16-14 (HL) |
148 | C00113957 | HARNESS CTRL/CONSOLE (HL) |
149 | C00118544 | EARTH LEAD BASE |
150 | C00199375 | HARNESS PSW/HEATER ( HL) |
151 | C00195041 | HARNESS |
160 | C00149572 | SCREW NO8 X 5/8 |
160 | C00201982 | Washing Machine Double Valve - Cold |
160 | C00112661 | Washing Machine Cold Valve |
160 | C00144007 | 3 WAY SOLENOID FILL VALVE (HL) |
201 | C00112567 | FRONT PANEL POLAR |
202 | C00112582 | SCREW NO8 X 1/2 |
203 | C00117326 | Washing Machine & Tumble Dryer Plinth |
210 | C00085194 | Washing Machine Door Interlock |
211 | C09900400 | SCREW PAN POZI |
213 | C00112587 | DOOR LATCH |
214 | C00095992 | LATCH PIN |
215 | C00112588 | LATCH SPRING |
216 | C00141704 | Washing Machine & Tumble Dryer Handle |
220 | C00115520 | Washing Machine Door Seal |
221 | C00112571 | DOOR SEAL RETAINER D |
221 | C00264305 | Washing Machine & Washer Dryer Door Seal Clamp |
222 | C00112572 | DOOR SEAL RETAINER |
230 | C00141570 | SCREW |
230 | C00112193 | DOOR HINGE |
240 | C00115521 | Washing Machine Door Bowl |
241 | C00202545 | Washing Machine & Tumble Dryer Outer Door Trim |
242 | C00195805 | Washing Machine Rear Door Trim |
243 | C00039537 | Washing Machine & Tumble Dryer Screw |
244 | C00115528 | Washer Dryer Door Plastic Bowl |
301 | C00201310 | TORX SCREW M8 |
302 | C00118998 | DRUM FRONT |
303 | C00202418 | Washing Machine Drum Bearing Kit |
303 | C00118999 | DRUM REAR |
304 | C00117352 | INNER DRUM |
305 | C00112681 | Washing Machine Drum Paddle |
306 | C00112682 | Washing Machine Drum Seal |
307 | C00144139 | SCREW DRUM JOINT (PA CK OF 16) |
310 | C00115531 | TOP WEIGHT WD |
311 | C00112574 | BOTTOM WEIGHT |
312 | C00118502 | WEIGHT FIXING |
315 | C00112684 | THIMBLE SPACER |
320 | C00112575 | DRUM PULLEY |
321 | C00112685 | PULLEY WASH 4MMTHICK |
322 | C00112686 | RETAINING BOLT |
323 | C00112576 | Washing Machine Drive Belt |
330 | C00201861 | Washing Machine Motor Brush Set |
330 | C00202415 | CARBONB BRUSH SET FOR CESET MOTOR ONLY |
330 | C00112577 | MOTOR 60MM ACC/FHP SINGLE PHASE (HL) |
330 | C00140797 | CABLE CLIP |
330 | C00254768 | MOTOR 52MM CESET 3 FIX 1/2 FIELD |
330 | C00278784 | TACHO GENERATOR KIT |
332 | C00112687 | FLEXIBLE MOTOR MOUNT |
333 | C00112686 | RETAINING BOLT |
334 | C00250676 | WASHER FLAT M8 |
335 | C00112689 | LOCKWASHER |
340 | C00112578 | Washing Machine Heating Element |
341 | C00112690 | HEATER BRACKET (HL) |
350 | C00112691 | Washing Machine Drum Suspension Spring |
351 | C00113964 | SPRING WARE SLEEVE |
352 | C00271755 | Washing Machine Suspension Damper Kit |
353 | C00112694 | SCREW |
354 | C00118593 | PLASTIC EXPANSION PEG |
360 | C00112696 | SUMP ASSEMBLY |
363 | C00112697 | PRESSURE HOSE |
366 | C00112699 | FIX CLIP DRUM-SUMPHO |
367 | C00112656 | HERBIE CLIP SUMP |
371 | C00117329 | DRUM SUPPORT (35MM) |
372 | C00115530 | HOSE CON NOZZLE |
372 | C00195074 | RETAINING CLIP CONDENSER |
373 | C00115535 | HOSE DISP FILTER |
373 | C00258759 | FLUFF FILTER HOSE 46CM |
374 | C00254394 | FLUFF FILTER .04 (HL ) |
401 | C00140801 | TOP COVER |
402 | C00149572 | SCREW NO8 X 5/8 |
408 | C00112633 | FRONT PANEL RETAINER |
410 | C00261745 | CABINET |
412 | C00112637 | LOWER BACK PANEL |
414 | C00201330 | WHEEL & BRACKET ASSY |
414 | C00112640 | Washing Machine Foot |
415 | C00112644 | SCREW |
416 | C00112640 | Washing Machine Foot |
417 | C00202842 | EEP EVOII BLANK EVO 2 |
417 | C00262286 | SMARTCARD WD420 H&C |
417 | C00262287 | SMARTCARD WD420 C/F |
417 | C00203613 | EEP WD420 NEW H/BOX |
417 | C00259580 | EEPROM (USE WITH 52MM CESET MOTOR) |
417 | C00262286 | SMARTCARD WD420 H&C |
417 | C00262287 | SMARTCARD WD420 C/F |
417 | C00267858 | SMARTCARD WD420 (CESET 52MM) |
417 | C00267859 | SMARTCARD WD420 (H/BOX) |
418 | C00142747 | FAN MOTOR HARNESS MOD.3.5 J16-14 (HL) |
418 | C00142746 | VALVES/NTC(J10) |
418 | C00250890 | BLACK CABLE CLIP |
418 | C00254409 | MODULE SPLASH GUARD MK2 (HL) |
418 | C00254535 | Washing Machine Power Board Module |
419 | C00112735 | CAP SERIAL PORT |
420 | C00112646 | CABINET HOSE CLIP |
421 | C00112647 | RETENTION CLIP |
430 | C00141983 | Washing Machine Transit Bolt Kit |
433 | C00141983 | Washing Machine Transit Bolt Kit |
440 | C00112653 | Washing Machine Drain Pump |
440 | C00112654 | PUMP FLAP VALVE |
441 | C00112655 | Washer Dryer Drain Hose |
442 | C00112656 | HERBIE CLIP SUMP |
444 | C00112658 | DRAIN HOSE HOOK |
450 | C00112659 | Washing Machine Pressure Switch |
452 | C00112660 | HOSE CLIP |
460 | C09900400 | SCREW PAN POZI |
460 | C00199373 | FLUSHING VALVE (HL) |
461 | C00202788 | COLD VALVE 4 WAY (HL ) |
461 | C00140837 | 3 WAY INLET VALVE (H L) |
462 | C00198646 | FILL HOSE HOT 2 M |
463 | C00112667 | Washing Machine and Dishwasher Fill Hose |
464 | C00149454 | Dishwasher & Washing Machine Cold Fill Adaptor |
464 | C00194506 | Washing Machine Dual |
464 | C00196665 | Washing Machine Fill Hose |
470 | C00203264 | Washing Machine Mains Cable & Filter |
475 | C00140811 | CABLE CLIP |
476 | C00112675 | HARNESS CLIP |
477 | C00112676 | BEARING KEEPER PLATE |
478 | C00112677 | BEARING - SPRING TOP |
479 | C00064537 | P/SWITCH BRACKET |
480 | C00140818 | 24MM CABLE CLIP |
480 | C00222800 | USB - SERIAL LEAD |
481 | C00115587 | HARDWARE KEY BLACK MK 2 HARDWARE KEY |
481 | C00272306 | Smart Card Reader |
482 | C00140797 | CABLE CLIP |
483 | C00112668 | VALVE MOULDING HOT |
483 | C00140810 | VALVE COVER C/FILL FOR DISP.WITH HOSES |
483 | C00143652 | ELECTROVALVE SUPPORT 1 EV NO HOSES (HL) |
483 | C00199371 | VALVE COVER |
484 | C00203423 | BLANKING CAP |
501 | C00115553 | DRYER FAN MOTOR (HL) |
501 | C00278310 | DRYER FAN MOTOR 230V 50HZ 42W |
501 | C00278679 | COVER FASTON EESPRIN G 1-336524-1 TYCO |
502 | C00199357 | HEATER BOX UPPER |
503 | C00140821 | SCREW M5X16 |
504 | C00115556 | Multi-Appliance Screw |
504 | C00087921 | SCREW M3.5X30TE |
505 | C00115557 | FAN COLLET (HL) |
506 | C00080658 | FAN BLADE(METAL) |
506 | C00194936 | WD PLASTIC FAN KIT (PLASTIC) (HL) |
507 | C00115561 | NUT |
508 | C00115562 | SEAL |
509 | C00254974 | HEATER BOX LOWER (NEW) |
510 | C00115564 | SEAL (HL) |
510 | C00195263 | SEAL (H/BOX TO DRUM) COMPLETE SEAL |
511 | C00250826 | TORX 6 X 28MM |
512 | C00254971 | LOWER REFLECTOR(NEW) |
513 | C00140828 | SCREW 5X6 INOX SS |
514 | C00080765 | Washing Machine & Washer Dryer Heating Element |
514 | C00254363 | HEATER (HL) |
515 | C00140828 | SCREW 5X6 INOX SS |
516 | C00202763 | H/BOX INNER TOP (STRAIGHT & SPIRAL) |
516 | C00199352 | S/S UPPER REFLECTOR (SPIRAL ELEMENT) |
517 | C00140828 | SCREW 5X6 INOX SS |
518 | C00115570 | T/STAT ONE SHOT 160C (HL) |
518 | C00140826 | LINK WIRE LONG |
518 | C00199364 | THERMOFUSE (HL) |
519 | C00141578 | CABLE CLAMP |
520 | C00202738 | O RING |
521 | C00115573 | THERMISTOR (HL) |
522 | C00140828 | SCREW 5X6 INOX SS |
523 | C00140828 | SCREW 5X6 INOX SS |
523 | C00141585 | EARTH TAB |
525 | C00199350 | BRACKET |
526 | C00199362 | SCREW N0. 6 X 5/16 POZI PAN HEAD |
999 | C00141983 | Washing Machine Transit Bolt Kit |
999 | C00221221 | SERVICE MANUAL |
999 | C00146883 | ENERGY LABLE |
999 | C00202895 | BRAILLE WD420P |
999 | HB00747 | INSTALLATION GUIDE |
999 | C00161616 | HANDBOOK 6KG WD |