Beko made washing machines elements and NTC sensors are quite easy to fit and on a lot of models the control board will tell you when something is wrong.

We are going to show you how to fit the new element and thermostat to this Bosch, Neff, Siemens or Balay washing machine this process should be pretty similar to your make and model of front loading machine. To order your Washing Machine Heater Element & Thermostat you will need your full model number. (This is

  We have made 3 videos on clearing blockages in washing machines, this one will show you how to clear the sump hose and filter, the other videos below will show you how to clear a pump and also how to remove foreign objects from within the drum.

  If you have a washing machine pump filter is jammed or stuck and you can’t open it do not force it. This video will show you how to gain access to the pump and remove any debris That may be blocking it. I have been using these Bore-scopes to find foreign objects in washing machines for

  If your washing machine is making an unusual noise like knocking scraping or scratching, this video will help you remove items from the drum there are also videos below to help you remove items from the sump hose and the pump system. The most common items that can get lodged in a washing machine drum are

  Error fault codes with E01, F08, F16, F34, E61 Error codes Vary on different models starting with WAA, WAE, WAQ, WFF, WFL, WFP, WOK, WOL.This video will show you how to replace a washing machine door lock (called an interlock); we will show you a step by step procedure on this process. This video can

  This video will show you how to replace a washing machine door lock without screws (called an interlock); we will show you a step by step procedure on the process.This video can be used on Balay, Bosch, Constructa, Hitachi, Lynx, Merker, Neff, Novamatic, Pitsos, Profilo, Schulthess, Siemens, Viva.To find your door lock for your Washing Machine you

 Important notice on Beko Before entering test mode please be aware that you are not meant to leave the washing machine Unattended. There is a chance the machine can overfill when testing the water valves or the Machine could overheat when testing the heater. Also when entering the test mode make sure the drum is empty

 Diagnosing  the Beko washing machine error

These codes are used on later models from about 2006 or so onwards.Washing machine and washer dryer models will displayed as a digital code, exactly as you will see below, in an LED or LCD panel or display on the front of the washing machine.Before you start any work or try to diagnose any fault