Indesit IWC6165 Drum not turning not spining think motor brushes worn
my indesit iwc6165 washing machine drum doesn't run in spin turns during wash cycle.I have removed the motor and the brushes which seam very short and there is a fair amount of carbon dust coating the back plate. Am I right to suspect worn brushes.Motor is a C.E.S.E.T MCA 61/64-148/AD1Cod. 160021115.01There is also a code MCA 61/64-148/AD9 on a bar code Brushes have a code just about to be worn into L94MF.Can you advise if you agree regardingt he brushes and if so which replacement should I order? I can supply pictures if that helpsRegardsAndrewp.s. the video on how to remove the motor was extremely helpful made it an easy operation
Andrew Miller
I will try and help with this problem Indesit IWC 6165
Thank you very much for the email. I think you will find that this washing machine has a couple of different motors fitted but after you sent me the pictures I was able to work out that these were the correct carbon brushes as long as you check the terminal diameter as there were two sizes, fitted small spade, connectors, and large spade connectors.
I have also added a couple of videos below to help you replace them
If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.
YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page