Logik LBMFMX15 Oven sometimes doesn’t heat up.

The oven selector switch looks ok. But one of the jumper wires is charred where it connect to the switch. How do I get hold of a new jumper wire?

Edmund Jackson

I will try and help with this problem Logik LBMFMX15 oven

You will actually have to make a wire lead up but make sure you use the correct type it needs to be heatproof wiring and also the Spade terminals need to be heatproof as well.  also, make sure that you use the correct size of wire I suspect it will be a heavy load Going Through the Wire it will be about 8 to 9 amp.

I also suspect that you will need a selector switch as this is a common problem I have put a couple of videos below to show you how to inspect and replace selector switches I am sorry I do not have a wiring diagram on this model

If you want to support the site please mark us to your favourites, also I would be grateful if you would subscribe to our social media channels as this really helps my site and keeps us going.

YouTube. http://www.youtube.com/user/howtorepair
Facebook. https://www.facebook.com/how.to.repair.appliances
And if we really helped you save money you can always click on the Buy Paul a Beer page