Indesit dishwasher error codes and faults Diagnostic fault finding
Dishwasher Error codes
When your dishwasher doesn't work you normally get an error code, you may just think it has flashing lights but on most machines they mean something, these are called error codes and are designed in a way to help an engineer or you find the fault with the dishwasher. this article is on Indesit which is made by the Merloni but as they make brands like Ariston, Creda, Hotpoint etc the fault codes may be similar. we have added a load of videos at the bottom to help you with your repairs when you work out the problem that you may have . please remember to support our site by shopping for your spare parts with us.
Indesit Dishwasher error codes
all models of Indesit dishwasher have different types of facial panel, whether you have free standing, slimline or integrated dishwasher the error codes may show in a different way, i have include some examples to give you a guideline and will explain more in the videos. You may be getting flashing lights giving you the fault code or it will be showing you the number in the digital display.
F01
Indesit Dishwasher Error code
Anti-flood sensor fault
Issue: The LED lights on your dishwasher are displaying in the following sequence
- LED 1: ON
- LED 2: OFF
- LED 3: OFF
- LED 4: OFF
Action: We recommend you check for leaks
F02
Indesit Dishwasher Error code
Water fill solenoid valve, impeller jug or water chamber failure
Issue: The LED lights on your dishwasher are displaying in the following sequence
- LED 1: OFF
- LED 2: ON
- LED 3: OFF
- LED 4: OFF
Action: We recommend you check that water is going to the dishwasher, the valve is working correctly, the impeller jug is functioning correctly, also check the water chamber has no restrictions on the flow rate, if the dishwasher cant fill in the correct amount of time the you will get an error.
F03
Indesit Dishwasher Error code
Water drain failure/ timeout pump problem
Issue: The LED lights on your dishwasher are displaying in the following sequence
- LED 1: ON
- LED 2: ON
- LED 3: OFF
- LED 4: OFF
Action: We recommend you check for blockages in the system and if fitted to your sink unit there may be a restriction there. Debri in the pump housing, faulty pump
F04
Indesit Dishwasher Error code
Thermostat fault
Issue: The LED lights on your dishwasher are displaying in the following sequence
- LED 1: OFF
- LED 2: OFF
- LED 3: ON
- LED 4: OFF
Action: We recommend you check wiring connection and thermostat
F06
Indesit Dishwasher Error code
Water fill timeout fault
Issue: The LED lights on your dishwasher are displaying in the following sequence
- LED 1: OFF
- LED 2: ON
- LED 3: ON
- LED 4: OFF
Action: Please check that the water supply is present and of sufficient pressure, also that the tap is fully on and that the fill hose is not restricted or kinked. Check that water is going to the dishwasher, the valve is working correctly, the impeller jug is functioning correctly, also check the water chamber has no restrictions on the flow rate, if the dishwasher cant fill in the correct amount of time the you will get an error.
F07
Indesit Dishwasher Error code
Water turbine damaged or fault
Issue: The LED lights on your dishwasher are displaying in the following sequence
- LED 1: ON
- LED 2: ON
- LED 3: ON
- LED 4: OFF
Action: Replace water turbine (impeller jug)
F08
Indesit Dishwasher Error code
Temperature timeout fault
Issue: The LED lights on your dishwasher are displaying in the following sequence
- LED 1: OFF
- LED 2: OFF
- LED 3: OFF
- LED 4: ON
Action: We recommend you check heating system element, thermostat, ntc sensor
F09
Indesit Dishwasher Error code
Software error fault
Issue: The LED lights on your dishwasher are displaying in the following sequence
- LED 1: ON
- LED 2: OFF
- LED 3: OFF
- LED 4: ON
Action: this is a fault with the board and normally need reprograming or replacing
F10
Indesit Dishwasher Error code
Heating element fault
Issue: The LED lights on your dishwasher are displaying in the following sequence
- LED 1: OFF
- LED 2: ON
- LED 3: OFF
- LED 4: ON
Action: We recommend you check the element and replace if faulty see our videos on this.
F11
Indesit Dishwasher Error code
Wash pump motor failure
Issue: The LED lights on your dishwasher are displaying in the following sequence
- LED 1: ON
- LED 2: ON
- LED 3: OFF
- LED 4: ON
Action: We recommend you check the motor and replace if it is faulty. also check the capacitor for the motor if fitted. sometimes the motor can seize due to the seal on the main pump failing.
F12
Indesit Dishwasher Error code
Main board & Display communication error fault
Issue: The LED lights on your dishwasher are displaying in the following sequence
- LED 1: OFF
- LED 2: OFF
- LED 3: ON
- LED 4: ON
Action: We recommend you check the wiring for loose connections or you may have faulty board.
F13
Indesit Dishwasher Error code
Main board fault
Issue: The LED lights on your dishwasher are displaying in the following sequence
- LED 1: ON
- LED 2: OFF
- LED 3: ON
- LED 4: ON
Action: We recommend you check the wiring for loose connections or you may have faulty board.
F15
Indesit Dishwasher Error code
Virtual sensor error fault
Issue: The LED lights on your dishwasher are displaying in the following sequence
- LED 1: ON
- LED 2: ON
- LED 3: ON
- LED 4: ON
-
How to replace Dishwasher pump Bosch, Siemens etc
-
Bosch, Neff or Siemens Dishwasher not emptying fault E25 Error Code
-
How a Dishwasher NTC thermistor Sensor works & how to test it
-
Dishwasher constantly draining Balay, Constructa, Kuppersbusch, Neff, Siemens, Tecnik.
-
Bosch dishwasher keeps emptying and filling, how to diagnose the fault and replace parts
-
Dishwasher not filling with water Aeg, Electrolux, Zanussi error code AL5 or ALS time out fault
-
How to replace a dishwasher door switch assembly on a Hotpoint
-
Hotpoint Dishwasher error codes 6th or 7th flashing neon
Hi,
I have an Indesit DFP573 EU, showing the error code A3. Somehow I cannot find the description for this code.
There is water at the bottom of the dishwasher, suggesting a pump error. However, this could be because the system shut down before pumping began.
I would appreciate some help!
Thank you,
JP
Hi,
I have this fault ‘Main board & Display communication error’ on my old indesit..it’s not a very good machine and i’m thinking it’s probably worth just replacing it, unless resolving the above is fairly simple ?
Regards…chris
my indesit dishwasher machine is has become inoperative and showing a code of flashing A1 .could you please advise a remedy.thanks.
mohammed
further to my last comment the indesit dishwasher of code A1 error is model DFP 573 EU.thanks
are you sure its a1 as f01 is Anti-flooding overflow check float switch and if water is in the base then you have a leak.
Appliances Engineer
Many thanks Paul you are correct as I found a ruptured hose and managed to repair it thank you very much .
Hi I’ve problem… On my dishwasher is lighting led 1 and 3 what does mean?
It it filing with water and then is error plus water is going out.
Thanks
I have the same fault did you find out what it was?
when you have a question please use contact us page for 24 hour response https://how-to-repair.com/help/contact-us/
Get Appliance help from Paul, Email him
Appliances Engineer
Hi
Unsure if you got this fixed, have had the same problem. Filter or hose blockage normally from grease. Try Soda Crystals, empty machine remove all the filters and check nothing is blocked, add soda crystals and boiling water, leave for 5 mins and use a plunger on the area where the filters are normally placed, leave for a further10 mins and then plunge again. Turn the machine onto a wash cycle, if the error code comes up again, repeat process. Use as much soda crystals as you like ( does not harm ) make sure water is hot. Once the machine goes onto a wash cycle let it finish, depending on how you have previously cleaned the machine? not a bad idea to run a second wash with crystals. It works, my dishwasher is proof of this.
Hi
We have an Indesit DFG15B1 just over two years old. For about a month it has not been completing a full cycle (think it’s error F10 led off/on/off/on – led 4 being by start/pause button). After washing it stops, F10 lights flashing and is emptying constantly with the rinse aid light flashing when we open the door. Both salt/rinse aid is sufficiently full. Please can you help?
Many thanks.
Hi,
We have a Indesit dishwasher, model DIFP36. After switching a program, it becomes a failure and flashes on/off button and number 13 flashes on the display.
What could be wrong? Hope you can help me.
Many thanks,
Elroy Beumer
Hi, I have an Indesit AAA class IDF 125
The start/pause button and the sun emblem buttons are flashing??? What does this mean and how do I fix it?? Thanks.
Indesit dif16 m1
Pierre button flashing and solid lights on 2nd and 4 th light out of the 6
Any ideas please
Hi, there is “10” flashing on the screen of my MVFTA+5H Ariston. I’ve heard two reasons for that: heating element and some generic “wiring fault”. Which one is true?
Many thanks in advance. Alex
Hi my dishwasher keeps flashing on three and won’t do a cycle. It’s not blocked I’ve tried to clear it of anything can anyone help please?
when you have a question please use our contact us page for 24 hour response https://how-to-repair.com/help/contact-us/
Appliances Engineer
Hiya I have an indesit dif 16 dishwasher and after about 20 seconds it turns off and leds 1 and 3 are flashing . I’ve searched the internet including your site to see what the flashing light indicate but can’t seem to find the fault for error code lights 1 and 3 on this model .hope u can help . Will defo buy u a beer if u can advise thanks
Hi Paul!
please help me Indesit evolution DE74 dishwasher occasionally, but more and more A08 error code is displayed on the lcd display, while inside the splashing steam is heard.
I’m looking forward to your answer, thank you again.
Steve from Hungary.
my dishwasher indiciet is start working in no2 position.ater finishing no2 the main power cuts off[ trip off the electricity].
no error code showing
THE SCREEN SHOWS ERROR CODE A5,How to solve?
Hi
I have an Indesit DFG 15B1 which stops after the first cycle, initial rinse/ soak, the appliance stops and will not move on. The rotor light is illuminated green and the salt light flashes rapidly. Both the rinse aid and the salt have been topped up.
During the first rinse cycle it fills ok with cold water then you can here it rotating. When I open it it, it’s not full of water, so presume the drain pump is working. Not sure how to interpret the error codes(lights on this machine as there no examples on the internet.
Can you help
Thanks Ant
Hi, my dishwasher shows the blinking error code F15. It’S model DFP 58T94 Indesit. Anybody has an explanation of this error code?
Thank you in advance
Ralf
Hi I have an Indesit idf125 and it’s showing wash and dry lights flashing when I run cycle could you please give me any idea what is the problem
I have Indesit IDF125 AAA class, it has not LED panel showing error, just 3 lights in a row. When i switch the machine on it sounds as though it is working for a short while but then the two outer LEDs flash and it switches off.
I’ve filled up the salt and rinse aid and ensures that the filter isn’t blocked, otherwise I’m it sure what to do next?
I have a Intergrated Dishwasher. I desist Type# LS12-EV03
Alarms shown are leds 1&3 on.
The machine goes through a complete cycle , filling ,heating, draining, but dishes are not washed .
It looks likes the washer arms , have not been used .
Is this a possible fault with the washer pump.
Thank you .
Regards Danny Murphy