Hi, I’ve checked the filter, which is clean. Nothing around the impeller. I’ve also cleared the drainage pipe. There was a little blockage in there but thats cleared now. Machine still filling and draining! I’m thinking I require a new Impeller jug after watching your video, What do you think. Dishwasher has been in store for a year but had hardly been used. It has been transported a couple of times.

Hi my washing machine is coming up with the error F43 I reset as per instructions. It did reset so I tried another 60 degrees wash. It filled as usual then obviously I couldn’t just sit there I returned to check when it was on a spin cycle stating 4 minutes remaining. My washing remained stationery, the clock went to 3 minutes with the error F43 re-appearing.My uncle is fantastic at fixing things so he is coming over to take a look. Am I right in telling him he needs to check the pump for a blockage ? also do you think it sounds like it could be the carbon brushes. My mum and I are struggling to pull the machine out to see if the serial number is on the back. I have quoted the Model above so is the serial number definitely needed.
Many thanks Sam and Lynne

Great website but hoping for a bit more guidance as have followed your instructions and i still get a 5S error during most cycles. Usually the cycle can be finished by justing pressing play after the error arises.
The pump is functioning as it will drain during different times in the cycle . I have checked all hoses, traps and the pump and it appears to be okay with no blockages.
This has has me stumped. Any ideas would be appreciated. Perhaps it could be a sensor or similar? So maybe a hard reset if this is possible.
Thanks in advance

Shane

 Hi SeanHave you checked the pump unit for Blockages, and made sure the float switch works correctly, although these videos are note on your make the principal still applies if the water container is not getting full then there is a good chance that there is a blockage on one of the systems this may

    Hi ArneIt looks like you have a blockage or a faulty pump. See related videos below. i will need your model number to be able to help you  To try and help with this problem on your Bosch Dishwasher: SuperSilence I have put together a full list of videos below on your dishwasher. There are many

    Hi PiarasI would check for  movement in the bearings on the drum also if the machine is not emptying in correct amount of time this can cause the machine to shake, see videos below. I have also included some useful links hereif you need spares for this model you will need model and serial number

    Hi Alan!I have come across this before, on this occasion it was a small sock That was jammed in the Gap at the front by the door seal it was not visible but with a bore scope I was able to see it and using a metal coat hanger I was able to hook it

If your washing machine starts and then stops or turns off and all the lights go out or the digital display goes blank there is a good chance you may have a fault with the circuit board. You may have a bad connection, a dry joint on one of the components, or you may have a

  If you have a washing machine pump filter is jammed or stuck and you can’t open it do not force it. This video will show you how to gain access to the pump and remove any debris That may be blocking it. I have been using these Bore-scopes to find foreign objects in washing machines for

  If your washing machine is making an unusual noise like knocking scraping or scratching, this video will help you remove items from the drum there are also videos below to help you remove items from the sump hose and the pump system. The most common items that can get lodged in a washing machine drum are