This is a Two Part Video, so please see both videos for Full Tutorial. Click here to see video on Replacing a Tumble Dryer Motor Part 1 How To Fit A Tumble Dryer Motor (PART 2) On a Hotpoint, Creda, Indesit, Ariston Machine Tumble Dryer Motors   How to replace a tumble dryer motor. If

This video will show you how to replace the bearings and drum spindle in a tumble dryer. it can also be used on all these models: Ariston, Asko, Aspes, Bluesky, Bomann, Brandt, Brother, Clatronic, Creda,Crusader, Edesa, Electra, Eurotech, Export, Exquisit, Friac, General electric, Hotpoint, Indesit, Jackson, Proline, Upo and white Westinghouse.We will show how to

 Hi SeanHave you checked the pump unit for Blockages, and made sure the float switch works correctly, although these videos are note on your make the principal still applies if the water container is not getting full then there is a good chance that there is a blockage on one of the systems this may

This video will show you how to identify your 3e error code fault and replace the motor or carbon brushes 3E error code is a Motor tacho fault detected Can also be caused by be main PCB   If the motor tacho signals are inputted less than 2 for 2 seconds after main drive motor

    Hi Barry   this is the belt for your dryer Bauknecht TRKK7869ex it is a DRIVE BELT 1936 mm long and 6 ridges it should have something like this stamped on it 1936H6 

    Hi Paul  hi i would start with the heater on this indesit IDC85, tumble dryer then check the motor and capacitor see videos below for help